Real-time hygiene testing
01 April, 2009 | Supplied by: Key Diagnostics Pty Ltd
The SystemSure Plus rapid hygiene system is a cleaning validation tool that provides an answer in seconds. It is a palm-sized system that is easy to use, with applications in large and small food processors, hospitals, restaurants, supermarkets and other industries where rapid detection of contamination is critical. It allows companies to determine the cleaning efficiency and hygienic status of surfaces and water, ensuring product quality.
Jet cleaning head
01 April, 2009 | Supplied by: Matrix Process Solutions Pty Ltd
The Toftejorg TZ-82 Rotary Jet Cleaning Head provides a tank cleaning diameter of up to 60 m.
Sealing compound
01 April, 2009 | Supplied by: Trelleborg Sealing Solutions
Trelleborg Sealing Solutions’ Turcon MF6 compound has been listed by NSF International as conforming to the requirements of NSF/ANSI Standard 51 — Food Equipment Materials.
Single function controller
01 April, 2009 | Supplied by: Siemens Ltd
The Wallace & Tiernan Single Function Controller (SFC) is a single measurement unit which is suitable for the measurement and control of disinfectants, allowing devices such as dosing pumps, electric stroke positioners and continuous actuators to maintain accurate and measured concentrations.
Cooker-extruder
01 April, 2009 | Supplied by: SPX FLOW TECHNOLOGY AUSTRALIA PTY LTD
The Baker Perkins SBX Master twin-screw cooker-extruder is a solid barrel extruder offering process flexibility through a modular barrel design and a high torque motor and gearbox combination.
Safe and non-toxic sanitiser
01 April, 2009 | Supplied by: Citrox NZ Ltd
Citrox is a natural safe and effective replacement for toxic sanitisers. It is a wholly natural biocide intermediate, which has been developed from soluble bioflavonoids taken from immature oranges.
Cooking oil quality measurement
01 April, 2009 | Supplied by: Testo Pty Ltd
The electronic testo 265 oil tester is a compact, electronic handheld instrument that is suitable for daily use. The main part of the instrument is a sensor developed by Testo, which can be immersed directly in the hot cooking oil. After approximately 25 to 30 s, the instrument shows the number of polar components directly in the display. The current cooking oil temperature is shown in a second display line. Two limits, which trigger a light-emitting diode whose colours depend on the oil quality, can be set in the instrument making operation easy.
Cheese brine purification
01 April, 2009 | Supplied by: Pall (Australia) Pty Ltd
Reliable microbial stabilisation of brine to reduce the risk of cheese contamination from spoilage or pathogenic microorganisms during brine salting is now possible with the Pall Microflow XL membrane system.
Low-flow spray nozzle
01 April, 2009 | Supplied by: Spray Nozzle Engineering
The Mini-M70LF spray nozzle features maximum cleaning with low-flow and thus, maximum water savings. A lightweight, easy-to-handle spray nozzle, the Mini-M70LF is designed for heavy-duty cleaning and ensures consistent spray pattern changes, even at a low flow rate.
Fresh-cut produce dryer
01 April, 2009 | Supplied by: Key Technology Australia Pty Ltd
Key Technology has redesigned its Auto Dryer for removing moisture from fresh-cut produce to enhance shelf life. Available in one-, two-, and four-drum configurations, the Auto Dryer features a larger 980 mm diameter drum that increases production throughput and new electronics that improve reliability and simplify operation.
Portable cap torque gauge
01 April, 2009 | Supplied by: IDM Instruments
The Mark-10 Series MGTC Cap Torque Gauge is a simple solution for basic handheld cap torque testing in packaging applications across the food and beverage industries.
Liquid and gas flow measurement
01 April, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
Although differential pressure (DP) flowmeters are based on a relatively inexpensive and mature technology, selecting and installing these devices is not simple and requires a reasonable level of engineering skill. With the Deltatop, Endress+Hauser has implemented a solution by supplying a one-stop-shop solution. All the steps related to product selection, engineering, calibration and manufacturing are now bundled together with Endress+Hauser supplying the Deltatop as a total package.
Eyewash station
01 April, 2009 | Supplied by: Graintec Pty Ltd
The Aero Eyewash Station works quickly, is easy to use and is easy to see. The station features a dust-proof drop down cover, eye-wash applicators and a mirror and is wall mountable.
Linear position sensors
01 April, 2009 | Supplied by: Australian Calibrating Services Pty Ltd
The MTS Systems Sensors Division Temposonics linear-position sensors can be instrumental in improving the filling process for facilities that package a wide variety of products. Where a packaging facility once required a combination scale to switch back and forth between various products during packaging cycles, the MTS linear position sensors can be used in equipment that is more compact due to fewer moving parts, as the sensors can replace a number of other components in the machine.
Waterproof SBC
01 April, 2009 | Supplied by: Backplane Systems Technology Pty Ltd
The ERS800-D16 is a slim, fanless, waterproof system based on iBase’s ECX800E-D16 single board computer.
