CRIUS Solisense turbidity meter
26 July, 2010 | Bintech Systems Pty Ltd
The CRIUS Solisense turbidity meter ranges from 0.02 NTU (FTU) to 8% solids and is claimed to be unique in its ability to measure from NTU to percent solids in one sensor. It is suitable for potable water monitoring, filter monitoring, mixed liquor suspended solids monitoring, sludge monitoring centrate monitoring, filtrate monitoring and other applications where a traditional turbidity meter or suspended solids analyser would be used.
Eaton power management and protection software
26 July, 2010 | Eaton Electrical (Australia) Pty Ltd
The Eaton power management and protection software range, including Intelligent Power Manager, NetWatch, Network Shutdown Module (NSM), Personal Solution-Pac and LanSafe, allows Windows 7 enterprise servers and small business PCs to be monitored and safely shut down during a power failure, protecting and saving valuable data.
Pelican Pack and Take ‘n Go liquid spill stations
26 July, 2010 | Revolution Materials
The Pelican Pack and Pelican Take ‘n Go are mobile and wall-mounted stations for cleaning up liquid spills. The cotton-based Fibercan absorbs oils, hydrocarbons (eg, petrol, kerosene) and water-based liquids and uses up to eight times less absorbent material than traditional media. Any excess Fibercan is separated out and kept for re-use.
Fluid Components International FS10A flow switch/monitor
26 July, 2010 | AMS Instrumentation & Calibration Pty Ltd
The Model FS10A flow switch/monitor from Fluid Components International (FCI) is a low-cost solution for continuously verifying flows within liquid or gas process analyser sampling systems. It is suitable for the continuous monitoring of analyser sample flows to provide the highest integrity process analysis without interruption.
Gems Sensors & Controls CAP-100/-200 Series capacitive level sensors
26 July, 2010 | Control Components Pty Ltd
The CAP-100 and CAP-200 Series capacitive liquid level sensors, from Gems Sensors & Controls, are designed to offer a level sensing solution for a wide variety of bottle types including plastic, glass and fibreglass. These compact sensors are suitable for medical applications such as waste, reagent or diluent liquids as well as dark, sticky or viscous fluids. Easy to calibrate, both sensor series are available in both aqueous and non-aqueous versions and can be delivered with factory preset sensitivity for quick installation for OEM orders. They may also be used as a proximity sensor to detect the presence of solids such as paper or pulp.
3M 8300 series disposable respirators
26 July, 2010 | 3M Safety & Graphics
The 3M 8300 series disposable respirators have a soft cushioned inner lining that provides comfort, with a robust outer shell that offers added durability.
Donaldson Filter Buddy portable filtration unit
26 July, 2010 | Donaldson Australasia Pty Ltd
Filter Buddy is a heavy-duty, handheld portable filtration system that allows operators to kidney loop reservoirs that normally cannot be done with larger filter carts.
Burkert LFC (liquid flow controller)
26 July, 2010 | Burkert Fluid Control Systems
The LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.
ICP Electronics WStrider-200 A rugged embedded controller
26 July, 2010 | ICP Electronics Australia
The WStrider-200 A rugged embedded controller is designed to operate under harsh conditions.
Parker CCIMS level-flange integrated DP manifold concept
26 July, 2010 | Parker (Aust) Pty Ltd
The CCIMS level-flange, a highly integrated manifold concept from Parker Hannifin, is designed to offer users a simpler means of installing level measurement instrumentation to process tanks and vessels.
BASF Ecovio plastic
26 July, 2010 | BASF Australia Ltd
The latest release of the Ecovio range from BASF can be used to make 100% compostable and biodegradable plastic bags which meet European standard EN 13432 and Australian standard AS 4736.
MTA range of DE refrigerated air dryer
26 July, 2010 | SCS Filtration Pty Ltd
SCS Filtration has a comprehensive range of refrigerated air dryers. The MTA range of DE dryers is available in sizes ranging from 0.3m3/min (9 cfm) to 37.5m3/min (1324 cfm) and in Australia with stocked dryer sizes from 20 to 494 cfm.
Amalgamated Instruments TP488 scanning monitors
26 July, 2010 | Amalgamated Instrument Co
The TP488 range of scanning monitors offers eight channels of input with eight configurable setpoint relays. These products are suitable for multipoint monitoring of analog transducers or temperature sensors.
Siemens Simatic CPU 317TF-2DP controller
26 July, 2010 | Siemens Ltd
The Simatic CPU 317TF-2DP controller from Siemens implements motion control, safety and standard tasks in one device. The controller utilises PLCopen-compatible motion control blocks and is suitable for coupled motion sequences of multiple axes.
Tiscor InspectNTrack HACCP software
11 July, 2010 | Arrow Scientific
The Tiscor InspectNTrack HACCP software, suitable for compliance-based inspections, assists users to schedule, track and document all activities.
