Tetra Pak OneStep milk processing technology
31 August, 2010 | Tetra Pak
Tetra Pak has launched OneStep technology, a Tetra Lactenso Aseptic solution that incorporates UHT white milk production within a single, high-throughput process.
Baker Perkins PerfectPan table and Multitex4 dough moulder
31 August, 2010 | SPX FLOW TECHNOLOGY AUSTRALIA PTY LTD
Baker Perkins Multitex4 dough moulder is claimed to deliver an immediate, visible improvement in loaf quality in high-output plant bakeries.
Datapaq Food Tracker temperature measuring system
31 August, 2010 | OneTemp Pty Ltd
Datapaq has released the Food Tracker profiling system - a multi-channel method of measuring the actual product and ambient temperature throughout cook/fry/chill processes.
Rosemount 2160 vibrating fork liquid level switch
31 August, 2010 | Emerson
The Rosemount 2160 vibrating fork liquid level switch is a IEC 62591 (WirelessHART) point level switch, which enables level detection to be made in locations previously inaccessible or too costly for wired devices.
GS1 Recallnet
31 August, 2010 | GS1 Australia
GS1 Australia and HP have signed an agreement to develop a cloud-based recall service to remove potentially harmful products from the supply chain.
AMCI DuraCoders stainless steel rotary encoders
31 August, 2010 | Automated Control Pty Ltd
The range of AMCI DuraCoders feature stainless steel housings and an IP69K rating for operation in the most extreme conditions. The rotary encoders have a good shaft load rating and are claimed to provide a longer life cycle than other encoders and to operate reliably in applications where standard encoders fail.
Sigma motorised metering pumps and delta diaphragm metering pumps
31 August, 2010 | ProMinent Fluid Controls Pty Ltd
The metering heads on Sigma motorised metering pumps and delta diaphragm metering pumps comply with stringent hygienic requirements.
Motion Technologies programmable limit switch solution
31 August, 2010 | Motion Technologies Pty Ltd
By combining ELAP’s MEM absolute multi-turn rotary encoder with SSI output (1024 steps/motor turn) and the CM78 microprocessor digital display with SSI input, Motion Technologies has created a simple and easily programmable limit switch solution.
Linmot Magsprings
31 August, 2010 | Motion Technologies Pty Ltd
Linmot Magsprings are made from permanent magnetics and no electricity is required for operation. Delivering a constant force over their entire working stroke, they are suitable for applications including weight load compensation or when a holding force or a constant force is required.
Dimpleflo modular heat exchangers
31 August, 2010 | Teralba Industries Pty Ltd
Dimpleflo modular heat exchangers can be used to recover energy from any warm or hot product or effluent.
SEW-Eurodrive DUV30A vibration analysis sensor
31 August, 2010 | SEW-Eurodrive Pty Ltd
The DUV30A vibration analysis sensor features faster sampling time at a constant speed, allowing the monitoring of more dynamic gear-unit applications. A key element of any effective predictive maintenance program, the DUV30A permits the early detection of gear-unit wear and damage, enabling site personnel to plan gear-unit maintenance.
Vanton Pump Chem-Gard CGMC centrifugal pumps
31 August, 2010 | Acromet (Aust) Pty Ltd
Vanton Pump Chem-Gard CGMC close-coupled, magnetically-driven thermoplastic centrifugal pumps are available in sizes from 38x25x152 to 76x51x203 mm for flows to 91 m3/h at heads to 50 m TDH.
Rittal Hygienic Design terminal box
31 August, 2010 | Rittal Pty Ltd
To complement its Hygienic Design range enclosures, Rittal has added a terminal box to the product portfolio.
Vanton Pump Sump-Gard SGK-2700 thermoplastic pump
31 August, 2010 | Acromet (Aust) Pty Ltd
The Vanton Pump Sump-Gard model SGK-2700 thermoplastic centrifugal pump handles flows to 4500 L/min at heads to 60.
TecQuipment bench-top heat exchangers
31 August, 2010 | Duff & Macintosh
The TecQuipment bench-top heat exchangers are bench-top service modules with optional small-scale demonstration heat exchangers.
