Hydac CMU 1000 online condition monitoring unit
26 July, 2010 | HYDAC International
The CMU 1000 is an electronic evaluation unit for permanent online condition monitoring of machines and systems. Data recorded from sensors (processed or unprocessed) can be transferred by the device via different ports or as an analog value to other devices or monitoring levels.
Beijer Electronics Exter T150-st stainless steel HMI
26 July, 2010 | Global Automation Asia-Pacific Pty Ltd
Beijer Electronics has added the T150-st to its Exter series of operator panels. The Exter T150-st has an acid-resistant stainless steel construction, so it is suited to those situations where acid-based cleaning agents are used.
Futek LLB400 miniature load button load cell
26 July, 2010 | Metromatics Pty Ltd
Futek Advanced Sensor Technology has released the LLB400 miniature load button load cell with improved overall accuracy. The load cell has a high accuracy with a deflection of 38 µm nominal and an operating temperature of -50 to 93°C.
SMC Pneumatics Series C55, double-acting, single-rod cylinders
26 July, 2010 | SMC Australia | New Zealand
Series C55, double-acting, single-rod, air-operated cylinders offer high performance and ISO 21287 compliance.
Haulotte Star 6P battery-electric, vertical mast stock picker
26 July, 2010 | Haulotte Australia Pty Ltd
The Haulotte Star 6P is a battery-electric, vertical mast stock picker with a 90 kg capacity adjustable stock-picking tray. It has a working height of 6 m, a platform height of 4 m and a width of just 0.76 m.
SEW-Eurodrive KES37 and RES37 stainless steel gear units
26 July, 2010 | SEW-Eurodrive Pty Ltd
The KES37 and RES37 stainless steel gear units feature casings and shafts made from stainless steel, inherently suitable for aseptic applications where caustic/high-pressure washdowns are required or where there is potential for product contamination.
CRIUS Solisense turbidity meter
26 July, 2010 | Bintech Systems Pty Ltd
The CRIUS Solisense turbidity meter ranges from 0.02 NTU (FTU) to 8% solids and is claimed to be unique in its ability to measure from NTU to percent solids in one sensor. It is suitable for potable water monitoring, filter monitoring, mixed liquor suspended solids monitoring, sludge monitoring centrate monitoring, filtrate monitoring and other applications where a traditional turbidity meter or suspended solids analyser would be used.
Eaton power management and protection software
26 July, 2010 | Eaton Electrical (Australia) Pty Ltd
The Eaton power management and protection software range, including Intelligent Power Manager, NetWatch, Network Shutdown Module (NSM), Personal Solution-Pac and LanSafe, allows Windows 7 enterprise servers and small business PCs to be monitored and safely shut down during a power failure, protecting and saving valuable data.
Pelican Pack and Take ‘n Go liquid spill stations
26 July, 2010 | Revolution Materials
The Pelican Pack and Pelican Take ‘n Go are mobile and wall-mounted stations for cleaning up liquid spills. The cotton-based Fibercan absorbs oils, hydrocarbons (eg, petrol, kerosene) and water-based liquids and uses up to eight times less absorbent material than traditional media. Any excess Fibercan is separated out and kept for re-use.
Fluid Components International FS10A flow switch/monitor
26 July, 2010 | AMS Instrumentation & Calibration Pty Ltd
The Model FS10A flow switch/monitor from Fluid Components International (FCI) is a low-cost solution for continuously verifying flows within liquid or gas process analyser sampling systems. It is suitable for the continuous monitoring of analyser sample flows to provide the highest integrity process analysis without interruption.
Gems Sensors & Controls CAP-100/-200 Series capacitive level sensors
26 July, 2010 | Control Components Pty Ltd
The CAP-100 and CAP-200 Series capacitive liquid level sensors, from Gems Sensors & Controls, are designed to offer a level sensing solution for a wide variety of bottle types including plastic, glass and fibreglass. These compact sensors are suitable for medical applications such as waste, reagent or diluent liquids as well as dark, sticky or viscous fluids. Easy to calibrate, both sensor series are available in both aqueous and non-aqueous versions and can be delivered with factory preset sensitivity for quick installation for OEM orders. They may also be used as a proximity sensor to detect the presence of solids such as paper or pulp.
3M 8300 series disposable respirators
26 July, 2010 | 3M Safety & Graphics
The 3M 8300 series disposable respirators have a soft cushioned inner lining that provides comfort, with a robust outer shell that offers added durability.
Donaldson Filter Buddy portable filtration unit
26 July, 2010 | Donaldson Australasia Pty Ltd
Filter Buddy is a heavy-duty, handheld portable filtration system that allows operators to kidney loop reservoirs that normally cannot be done with larger filter carts.
Amalgamated Instruments TP488 scanning monitors
26 July, 2010 | Amalgamated Instrument Co
The TP488 range of scanning monitors offers eight channels of input with eight configurable setpoint relays. These products are suitable for multipoint monitoring of analog transducers or temperature sensors.
MTA range of DE refrigerated air dryer
26 July, 2010 | SCS Filtration Pty Ltd
SCS Filtration has a comprehensive range of refrigerated air dryers. The MTA range of DE dryers is available in sizes ranging from 0.3m3/min (9 cfm) to 37.5m3/min (1324 cfm) and in Australia with stocked dryer sizes from 20 to 494 cfm.
