Sine-wave vibro viscometer

13 August, 2008 | Supplied by:

The Sine-wave Vibro Viscometer, the SV-A Series, can perform viscosity measurements with a sample liquid as small as 2 mL (SV-1A).

Chemical residue and microbiological testing

13 August, 2008 | Supplied by:

Symbio Alliance is a ‘one-stop shop’ specialising in the provision of chemical, residue and microbiological testing services to the food, agricultural and environmental industries.

Stainless steel engineering components

13 August, 2008 | Supplied by:

T.E.A. Transmissions has a range of stainless steel engineering components available.

DIN rail transmitters

13 August, 2008 | Supplied by:

Status Instruments (UK) has released the SEM1600 series of low-profile universal input DIN rail transmitters.

Valve labelling

01 August, 2008 | Supplied by: Air & Hydraulic Systems Pty Ltd

Praher Valves has released a colour-coded labelling system for valves and pipe clips.

Portable spill containment

01 August, 2008 | Supplied by: Enware Australia Pty Ltd

The portable spill-containment product series from Ecopac includes the portable Stinger Berm, for immediate large-scale spill response. It has a fuel and chemical-resistant containment area, as well as high tear and puncture resistance for demanding applications or terrain.

Pressure tank mixers

01 August, 2008 | Supplied by: Teralba Industries

Mixquip side entry agitators now incorporate a mechanical seal to suit all high-pressure applications. Products in pressure vessels, de-aerators and vacuum tanks can be blended or mixed using these agitators.

ABB Pick-and-place robot

01 August, 2008 | Supplied by: ABB Australia Pty Ltd

ABB Australia’s second-generation FlexPicker robot, the IRB 360, is more productive with increased speed, higher payload and a smaller footprint than its predecessors.

Seals eliminate caramelising around shafts

10 July, 2008 | Supplied by:

MECO seals are custom-designed and manufactured to each application, and can retrofit most process equipment. The seals incorporate up to 6 mm of shaft run-out capacity into its seal designs. Seals are available either un-split or fully split, to permit installation without removal of drive or bearings.

Solid seal system

10 July, 2008 | Supplied by: Spray Nozzle Engineering

With the expandable bung/cam locking system, the Rack-it-Teer makes the wine racking process faster and uses less purging gas. It allows for the filling and emptying of 10 or more barrels to each bottle of purging gas used, assuming gas is used to fill or empty the wine barrel.

Real-time PCR instrument

10 July, 2008 | Supplied by: Thermo Fisher Scientific

The BAX Q7 System from Dupont Qualicon with real-time PCR uses DNA-based technology, as well as state-of-the-art probe-based chemistry, for accuracy and sensitivity.

Listeria control in consumer protein products

04 July, 2008

Better sanitation procedures at retail establishments would reduce the incidence of Listeria contamination and disease outbreaks in the community.

Brushless DC motors

01 July, 2008 | Supplied by: M Rutty & Co Pty Ltd

The GR 22, G 30.1 and G 30.0 motors are now available in versions with neodymium magnets.

Flow sensor

01 July, 2008 | Supplied by: Festo Pty Ltd

Capable of operating as a standalone flow sensor, or as part of an MS6 service unit combination, the MS6-SFE features a clearly laid out, backlit LCD showing flow or consumption data combined with a choice of output options.

Compressed air energy management

01 July, 2008 | Supplied by: domnick hunter Pty Limited

An energy-management system from Parker domnick hunter is designed to save up to 80% of power consumed during drying compressed air.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd