Check-metering kit
01 April, 2009The Sitrans FUP1010 check-metering kit is a portable clamp-on unit, designed for the water and wastewater industry to measure the performance of existing flowmeters with accuracy, performance, versatility and compatibility.
Analog and digital temperature
01 April, 2009 byBanner Engineering has introduced a new way to collect analog, digital and temperature information in hazardous areas. The system is a combination of wireless communication, battery technology and intrinsically safe electronics.
Liquid and gas flow measurement
01 April, 2009 byAlthough differential pressure (DP) flowmeters are based on a relatively inexpensive and mature technology, selecting and installing these devices is not simple and requires a reasonable level of engineering skill. With the Deltatop, Endress+Hauser has implemented a solution by supplying a one-stop-shop solution. All the steps related to product selection, engineering, calibration and manufacturing are now bundled together with Endress+Hauser supplying the Deltatop as a total package.
Linear position sensors
01 April, 2009 byThe MTS Systems Sensors Division Temposonics linear-position sensors can be instrumental in improving the filling process for facilities that package a wide variety of products. Where a packaging facility once required a combination scale to switch back and forth between various products during packaging cycles, the MTS linear position sensors can be used in equipment that is more compact due to fewer moving parts, as the sensors can replace a number of other components in the machine.
Solids flow sensor
31 March, 2009 byFlowJam is a non-contact flow/no flow sensor for solids. It uses a microwave technology to give results under harsh conditions of dust and sunlight. It is suitable for detecting solid flows in hoppers, conveyors, screw conveyors, air slides, etc.
Broken bag detection
31 March, 2009 byDusty is a broken bag detection system. It uses a triboelectric measuring technique and detects solid particles in a gas flow. The particles must be 0.3 µm in size, or larger.
Interface level detection
03 November, 2008Compared to a standard level measurement in liquids, the detection and measurement of interfaces have their own particular challenges, leaving many interface applications without reliable level measurements. Most popular today are the electronic or non-mechanical solutions with no moving mechanical parts which offer much higher long-term stability and low or no maintenance operation.
Flow sensor
01 July, 2008Capable of operating as a standalone flow sensor, or as part of an MS6 service unit combination, the MS6-SFE features a clearly laid out, backlit LCD showing flow or consumption data combined with a choice of output options.
Microwave level measurement
01 June, 2008Endress+Hauser has launched performance enhancements to its range of free-to-air microwave devices.
Hygienic level detection
01 June, 2008Level measurement in hygiene-sensitive industries such as food is claimed to have become simpler, safer and more accurate with the release of Endress+Hauser’s Levelflex M FMP43.
Pump diagnostic
01 June, 2008A line of pump diagnostic pressure sensors that detect potential pump damage caused by cavitation, trapped air or gas, blockages and deposits has been introduced by ifm efector.
Wireless, waterproof core temperature data loggers
01 June, 2008The TandD RTR-61 wireless/waterproof data logger is designed to read the temperature or record the temperature from a penetration-type sensor.
Vision system
01 June, 2008In-Sight Micro is a small, smart and easy-to-use vision system. The complete vision system fits into a small package that measures 30 x 30 x 60 mm.
Powered process indicator
01 June, 2008The DI4WP is a power process indicator mounted in an IP67-rated surface mounting weatherproof enclosure that accepts standard process signals of 4-20 mA and a 0-10 VDC and generates a 4-digit (9999 count) high-contrast LCD (liquid crystal) display of 25 mm digit height with optional backlighting.
Process analysers
01 June, 2008SensoTech LiquiSonic systems can be used to monitor and control liquids in intake lines, reactors, filters, scrubbers, heat exchangers, waste lines, basins and almost anywhere liquid flows, increasing the safety of industrial processes.
