The wireless temperature data logger EBI 25 from ebro Electronic is waterproof (IP 67) and has a temperature measuring range of -30 to +70 °C.
The Glow Hog mat is for use in any facility where emergency conditions may cause a reduction in light for evacuation or after-hours access.
Sierra’s Steel-Trak model 640S immersible thermal mass flowmeter is now available in a special high-temperature option capable of operating in process temperatures up to 400 °C.
Emerson Process Management has released wireless float switch solutions that combine its Mobrey float switches with the Rosemount 702 wireless discrete transmitter.
Banner Engineering has introduced a new way to collect analog, digital and temperature information in hazardous areas. The system is a combination of wireless communication, battery technology and intrinsically safe electronics.
Although differential pressure (DP) flowmeters are based on a relatively inexpensive and mature technology, selecting and installing these devices is not simple and requires a reasonable level of engineering skill. With the Deltatop, Endress+Hauser has implemented a solution by supplying a one-stop-shop solution. All the steps related to product selection, engineering, calibration and manufacturing are now bundled together with Endress+Hauser supplying the Deltatop as a total package.
The MTS Systems Sensors Division Temposonics linear-position sensors can be instrumental in improving the filling process for facilities that package a wide variety of products. Where a packaging facility once required a combination scale to switch back and forth between various products during packaging cycles, the MTS linear position sensors can be used in equipment that is more compact due to fewer moving parts, as the sensors can replace a number of other components in the machine.
Turck has introduced a dual-axis inclinometer sensor for angular tilt detection. The sensors feature compact rectangular housings and may be mounted at ±10, ±45, ±60 and ±85° angles.
The Sitrans FUP1010 check-metering kit is a portable clamp-on unit, designed for the water and wastewater industry to measure the performance of existing flowmeters with accuracy, performance, versatility and compatibility.
FlowJam is a non-contact flow/no flow sensor for solids. It uses a microwave technology to give results under harsh conditions of dust and sunlight. It is suitable for detecting solid flows in hoppers, conveyors, screw conveyors, air slides, etc.
Dusty is a broken bag detection system. It uses a triboelectric measuring technique and detects solid particles in a gas flow. The particles must be 0.3 Âµm in size, or larger.
Compared to a standard level measurement in liquids, the detection and measurement of interfaces have their own particular challenges, leaving many interface applications without reliable level measurements. Most popular today are the electronic or non-mechanical solutions with no moving mechanical parts which offer much higher long-term stability and low or no maintenance operation.
Capable of operating as a standalone flow sensor, or as part of an MS6 service unit combination, the MS6-SFE features a clearly laid out, backlit LCD showing flow or consumption data combined with a choice of output options.
Siemens’ multifunction measuring device — the Sentron PAC3200 — combines a power measuring and monitoring device into one single product.
In-Sight Micro is a small, smart and easy-to-use vision system. The complete vision system fits into a small package that measures 30 x 30 x 60 mm.