FGP Sensors XPCM10 miniature pressure transducer
03 March, 2010 byThe XPCM10, from FGP Sensors, is a miniature pressure transducer designed for use in temperatures of up to 220°C. It incorporates the company’s SanShift technology that virtually eliminates zero shifts caused by installation torque.
Dwyer Instruments WMT series multi-jet water meter with pulse output
03 March, 2010 byThe WMT series multi-jet water meter with pulse output can be used for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges, even in low flow applications.
Emerson Rosemount TankRadar Rex and Pro tank gauging system
03 March, 2010 byEmerson’s Rosemount TankRadar Rex and Pro tank gauging system now include smart wireless functionality. The radar-based Rex and Pro systems can be installed in a storage tank farm without the need to install long-distance signal wiring. Tank gauging data from remotely located tanks, previously collected manually or not at all, can now be easily integrated into the control system, resulting in more efficient tank capacity utilisation, more accurate inventory and better loss control.
Anton Paar L-Dens 323 density transmitter
03 March, 2010The Anton Paar L-Dens 323 density transmitter is now also available with wetted parts made of Hastelloy. L-Dens 323 is suitable for the continuous monitoring of the density (or concentration) of liquids when an accuracy of 1x10-3 g/cm3 is required for the density results.
Endress+Hauser Prosonic S FDU90 ultrasonic sensor
02 March, 2010 byEndress+Hauser’s Prosonic S FDU90 ultrasonic sensor for continuous, non-contact level and flow measurement has a 70 mm blocking distance which allows the device to maximise filling capacity in short-range applications.
ifm efector electronic contact manometer PG
07 January, 2010 byThe electronic contact manometer PG combines high-quality pressure transmitter qualities with 0.2% accuracy, a 4-20 mA analog output signal and a switching output with the readability of an analogue manometer display.
Delta Ohm HD45/6 series of indoor air-quality monitors
07 January, 2010 byThe HD45/6 series of indoor air-quality monitors feature indication, transmission and control of ambient temperature, relative humidity, carbon dioxide and dew point.
Schmidt Flow-Sensor SS 20.500
07 January, 2010 byThe Schmidt Flow-Sensor SS 20.500 is suitable for the measurement of flow velocity in dusty environments where the dirt tolerant design and easy cleaning enable measuring accuracy and repeatability.
SmartSonic-2TM SMART ultrasonic level transmitter
07 January, 2010 byThe SmartSonic-2TM is the second generation SMART ultrasonic level transmitter incorporating simple step-by-step PC set up and calibration.
Hioki 8835 Memory HiCorder
07 January, 2010 byThe Hioki 8835 Memory HiCorder is an advanced four-channel, A4-sized recorder with a 6.4-in colour TFT liquid crystal display.
Dwyer Instruments Series UXF3 Ultrasonic Flowmeter Converters
07 January, 2010 byDwyer Instruments has released the Series UXF3 Ultrasonic Flowmeter Converter.
Conlab ZigSense wireless sensors range
07 January, 2010 byThe Conlab ZigSense line of wireless sensors utilises ZigBee mesh network technology as its core communications channel. Australian designed and made, ZigSense wireless nodes establish a self-healing network of spatially distributed sensors that cooperatively monitor physical and environmental conditions. Data can be transferred to standard SCADA, telemetry, PLC and HMI stations via a ZigSense communications gateway.
Selecting a safety inspection package
02 December, 2009 by Naaman Shibi, Techs4biz Australia Pty LtdCan a PDA (a handheld device) automate your food safety audits and replace paper forms as part of your OHS systems? Absolutely.
Process control actuator
30 October, 2009 byThe Rotork GPSA electric, explosion-proof, process control actuator offers high-precision performance, an advanced human-machine interface (HMI) and cost-saving capabilities.
Personal environmental monitors
30 October, 2009 byMSP Corporation’s Model 200 Personal Environmental Monitor is a lightweight personal sampler for collecting airborne particles in the PM2.5 and PM10 size ranges. PM2.5 and PM10 particles are airborne particles less than 2.5 and 10 µm, respectively. They are frequently used to provide a measure of airborne particle concentration for studying potential health effects of airborne particles in the indoor or outdoor environment.
