Vanton Pump Sump-Gard SGK-2700 thermoplastic pump
31 August, 2010 byThe Vanton Pump Sump-Gard model SGK-2700 thermoplastic centrifugal pump handles flows to 4500 L/min at heads to 60.
Automated lasagne line
24 August, 2010GS Italia has used its experience in the manufacture of food processing and packaging equipment for fresh, pasteurised and deep freeze food products to automate the production of fresh lasagne.
Donaldson Filter Buddy portable filtration unit
26 July, 2010 byFilter Buddy is a heavy-duty, handheld portable filtration system that allows operators to kidney loop reservoirs that normally cannot be done with larger filter carts.
Burkert LFC (liquid flow controller)
26 July, 2010 byThe LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.
Driving out counterfeit motor and drive technologies
04 June, 2010Australian drive solutions providers are stepping up the fight against counterfeit gear-unit and motor ‘copy cats’ in order to safeguard Australian industry from breakdowns, inefficiency and downtime.
Champion Compressors EcoPak compressors
06 May, 2010 byChampion Compressors has launched its range of EcoPak compressors. Combining the proven technologies of variable speed drive (VSD) with variable output control (VOC), Champion has developed a compressor family that delivers energy-efficient compressed air at the top end of its capacity.
Allen-Bradley 193-EC5 E3 Plus solid-state overload relay
06 May, 2010 byRockwell Automation has expanded its overload relay family with the Allen-Bradley 193-EC5 E3 Plus solid-state overload relay, featuring voltage protection and energy monitoring.
SEW-Eurodrive Movipro SDC (standard drive controller)
06 May, 2010 bySEW-Eurodrive has released the Movipro SDC (standard drive controller). The SDC features a compact IP54-rated enclosure and provides industry with an easy-to-use field-mountable drive solution - for decentralised single-axis speed control and positioning applications.
Dimpleflo shell and tube heat exchangers range extended
06 May, 2010 byTeralba Industries has upgraded equipment at its heat exchanger design and manufacturing facility to produce a significantly larger range of Dimpleflo shell and tube heat exchangers. This includes heat exchangers with a shell diameter of 2 m and length of 15 m.
Ishida IX-GA-DK series X-ray inspection system
06 May, 2010With IP69K waterproof construction, the Ishida IX-GA-DK series X-ray inspection system can be used for meat, poultry, seafood and other food processors requiring washdown construction.
Dedicated service team pays dividends for CBPA
04 May, 2010A Sydney-based milk and beverage contract packaging company has boosted its plant operational efficiency from 75% to more than 90%, and has doubled its overall output, in months.
Mixquip range of heavy-duty top-entry agitators and mixers
03 May, 2010 byThe Mixquip range of top-entry agitators and mixers is suitable for a number of industries and applications, including food, beverage, wine, chemical, confectionery, dairy, wastewater and pharmaceutical.
Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drive
03 May, 2010The Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drive provides machine builders and end users with the ability to standardise on a single communication network for easier commissioning, configuration and start-up.
CST Wastewater Solutions SFC vertical screen compactor
04 March, 2010 byThe SFC vertical screen compactor can be used to cost-effectively screen wastewater and compact extracted solids.
Turck 7/8-16UN minifast explosion-proof feed-through receptacle
04 March, 2010 byThe 7/8-16UN minifast explosion-proof feed-through receptacle is CSA certified as a secondary conduit seal. The quick-disconnect unit can be used to prevent gas migration or as a boundary seal, when used with a Turck CSA certified cordset.
