igus iglidur J350 polymer material
18 February, 2011 byThe tribo-optimised material iglidur J350 has been added to the igus iglidur J all-round polymer plain bearing range. Maintenance- and lubricant-free plain bearings made of this material can be used up to a continuous service temperature of 180°C and, as a press-fit bushing, offer a high interference fit. Additional axial securing is only necessary in applications with an ambient temperature greater than 150°C.
Silvent SIS silencers
18 February, 2011 bySilvent’s safety silencers are designed to handle sensitive systems with large flows that require minimal flow restriction. The silencers are compact in size, provide effective noise suppression and feature a built-in warning indicator that immediately shows any increase in backpressure in the system.
Toftejorg TZ-750 Rotary Jet Head cleaning head
18 February, 2011 byThe Toftejorg TZ-750 Rotary Jet Head cleaning head for tank washing requirements. The Jet Head provides a 3D indexed impact cleaning over a defined time period, which represents a means of achieving quality assurance in tank cleaning.
Alfa Laval S-separator
18 February, 2011 byThe latest version of the Alfa Laval S-separator offers robustness and greater efficiency that allows the same amount of oil to be handled with a smaller separator. The product is used for engine protection and separation efficiency, particularly in working with demanding residual fuel oils.
HepcoMotion SBD sealed belt drive
16 February, 2011 byHepcoMotion SBD sealed belt-driven units are offered in standard and cleanroom configurations, come in two sizes and are claimed to provide a higher level of performance in terms of load capacity and life than other comparably sized systems.
RotaTherm Cube continuous cooking and cooling system
07 January, 2011 byThe RotaTherm Cube is a continuous cooking and cooling system for food production of rates up to 1000 kg/h.
Dodge ISN end covers
07 January, 2011 byA range of end covers has been introduced to the Dodge ISN bearing range. The product provides an additional barrier to contamination in the harshest of applications.
Geelen counterflow dryers and coolers
07 January, 2011 byGeelen counterflow dryers and coolers exclusively use the counterflow principle which is claimed to be the most efficient method to exchange energy between any two flows of gases, liquids or solids. By applying this principle in the dryers, users can minimise the amount of drying air needed and maximise the amount of energy that can be transferred. This results in a lower air exhaust volume and a lower exhaust air temperature.
Boge SO 150-2 to SO 269-2 oil-free, water-cooled screw compressors
07 January, 2011 byBoge has launched its second-generation SO 150-2 to SO 269-2 oil-free, water-cooled screw compressors. Increased efficiency, improved volume flow and lower sound pressure values are just some of the developments which have been made.
Pepperl+Fuchs high-temperature sensor cordsets and cables
07 January, 2011Pepperl+Fuchs has released a range of cables and cordsets for high-temperature environments. With improved resistance to weld slag, the cables can handle temperature ranges of -40 up to +150°C for extended time periods of up to 3000 h.
Replacing gear pumps at chocolate factory
06 January, 2011Watson-Marlow Masosine MR and SPS series positive displacement pumps have been installed at Kinnerton, the chocolate and confectionery specialist. The first Masosine pump was introduced to replace a gear pump that was damaging product on an Easter egg production line, with a second model acquired recently to support a newly installed caramel production line. The company has now decided to standardise on Masosine pumps.
Unibic airs new production line
06 December, 2010Unibic has optimised production at its specialty biscuit, cake and pastry manufacturing plant with the aid of a customised compressed air audit and an energy-efficient compressed air system.
Shaking helps sterilise soup faster
10 November, 2010A French manufacturer processing premium fish soup filled in glass jars is the recipient of the first industrial Shaka (diameter 1300 mm and with a useful length of 1400 mm) that combines shaking with heat to sterilise product more rapidly.
Allen-Bradley ControlLogix L73 and L75 programmable automation controllers
04 November, 2010 byThe Allen-Bradley ControlLogix L73 and L75 programmable automation controllers (PACs) provide advanced memory, speed and processing capabilities for a wide range of control demands, from high-performance logic and motion to information-intensive process applications.
AMO Corporation LMB-410 spar linear encoder
04 November, 2010 byAMO Corporation has released the IP67-rated LMB-410 spar linear encoder.