TEA Transmissions stainless steel magnetic couplings
04 November, 2010 byStainless steel couplings have no wearing parts providing wear-free transmission of torque between the driving and the driven parts through any non-ferrous wall. This makes them suitable for mixers and agitators in food processing and pharmaceutical industries where contents must be isolated from the drive.
Burkert MFC Type 8713 gas mass flow controller
04 November, 2010 byMFC Type 8713 is an instrument for the control of the mass flow of gases that is relevant for most applications in process technology.
Linde Redline specialty gas supply systems
04 November, 2010 byThe Redline high-performance and purity-sensitive specialty gas supply systems are modularly designed to slot into central gas supply systems.
Aerzen Delta Hybrid rotary lobe compressor
04 November, 2010 byThe Aerzen Delta Hybrid is a synergy of blower and compressor technology that has been designed for oil-free compression of air and neutral gases. It has applications in varied industries including the food and beverage, wastewater treatment plants or for the pneumatic transport of powders.
AMO Corporation LMB-410 spar linear encoder
04 November, 2010 byAMO Corporation has released the IP67-rated LMB-410 spar linear encoder.
Huco Dynatork air motor
04 November, 2010 byThe Huco Dynatork air motor is based on a free-floating piston design that is capable of precise position control. Its maximum torque is transmitted on start-up and this can be adjusted to fine limits by standard airflow valves.
Alfa Laval UltraPure Magnetic Mixer
04 November, 2010 byThe UltraPure levitated Magnetic Mixer (MM) uses a strong magnetic field to levitate and rotate the impeller, thereby eliminating the need for complex bearings and seals and reducing the risk of fouling and downtime for cleaning and replacing components.
Huco Dynatork Oldham stainless steel couplings
04 November, 2010 byHuco Dynatork’s Multi-Beam, Single Beam and Flex-P couplings are all available in stainless steel as is a wide selection of its universal joints, rod ends, linkages, gears, clevises, ball and socket joints and leadscrews.
Drying without the freeze
06 October, 2010 byUsing proprietary technologies developed in conjunction with the University of British Columbia, Canadian company EnWave is focused on the development of new methods of dehydrating food and biological materials, using radiant energy vacuum technology.
Electric motors for dry and wet areas
06 October, 2010Motors used in food production areas are primarily selected for either ‘dry’ areas or ‘wet’ areas. These are entirely different situations with very different demands. We assume we are looking at safe areas, where there is no hazard from combustible gas or liquids.
Mueller Temp-Plate heat exchanger
26 September, 2010The Mueller Temp-Plate heat exchanger can be used for heat transfer in the plating, metal finishing, chemical, textile, brewery, pharmaceutical, dairy, pulp and paper, food, nuclear, beverage and waste treatment industries.
Secomak Dry Guide drying solution
06 September, 2010 bySecomak’s Dry Guide drying solution is claimed to improve the performance of the airknife concept.
ITT e-SV model stainless steel vertical multi-stage pump
03 September, 2010 byThe e-SV model stainless steel, vertical multi-stage pump features hydraulic design and efficiency characteristics that are claimed to lower life-cycle costs and increase energy savings. The pumps are suitable for a wide variety of industrial applications.
TEA Transmissions stainless steel permanent magnet couplings
03 September, 2010 byStainless steel permanent magnet couplings have no wearing parts, providing wear-free transmission of torque between the driving and the driven parts through any non-ferrous wall. This makes them suitable for mixers and agitators in the food processing and pharmaceutical industries where contents must be isolated from the drive.
SEW-Eurodrive DR motor series
03 September, 2010 bySEW-Eurodrive has extended its energy-efficient DR motor series with the inclusion of new 2- and 6-pole variants, complementing its established 4-pole DR motor varieties. Combined with many user options, the extended DR motor line-up provides enhanced motor choice and flexibility, delivering optimised energy efficiencies to a broad range of drive applications.
