Processing :: FoodProcessing

Processing

ISDL intrinsically safe temperature/humidity data logger

26 July, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd

The series ISDL intrinsically safe temperature/humidity data logger accurately records temperatures that range from -40 to 80°C. The easy-to-use DL700 software makes retrieving data simple and allows for user-selectable sampling rates. The device can easily be started and stopped from a PC or delayed to start up to six months in advance.

Hydac CMU 1000 online condition monitoring unit

26 July, 2010 | Supplied by: HYDAC International

The CMU 1000 is an electronic evaluation unit for permanent online condition monitoring of machines and systems. Data recorded from sensors (processed or unprocessed) can be transferred by the device via different ports or as an analog value to other devices or monitoring levels.

Donaldson Filter Buddy portable filtration unit

26 July, 2010 | Supplied by: Donaldson Australasia Pty Ltd

Filter Buddy is a heavy-duty, handheld portable filtration system that allows operators to kidney loop reservoirs that normally cannot be done with larger filter carts.

Pelican Pack and Take ‘n Go liquid spill stations

26 July, 2010 | Supplied by: Revolution Materials

The Pelican Pack and Pelican Take ‘n Go are mobile and wall-mounted stations for cleaning up liquid spills. The cotton-based Fibercan absorbs oils, hydrocarbons (eg, petrol, kerosene) and water-based liquids and uses up to eight times less absorbent material than traditional media. Any excess Fibercan is separated out and kept for re-use.

Gems Sensors & Controls CAP-100/-200 Series capacitive level sensors

26 July, 2010 | Supplied by: Control Components Pty Ltd

The CAP-100 and CAP-200 Series capacitive liquid level sensors, from Gems Sensors & Controls, are designed to offer a level sensing solution for a wide variety of bottle types including plastic, glass and fibreglass. These compact sensors are suitable for medical applications such as waste, reagent or diluent liquids as well as dark, sticky or viscous fluids. Easy to calibrate, both sensor series are available in both aqueous and non-aqueous versions and can be delivered with factory preset sensitivity for quick installation for OEM orders. They may also be used as a proximity sensor to detect the presence of solids such as paper or pulp.

CRIUS Solisense turbidity meter

26 July, 2010 | Supplied by: Bintech Systems Pty Ltd

The CRIUS Solisense turbidity meter ranges from 0.02 NTU (FTU) to 8% solids and is claimed to be unique in its ability to measure from NTU to percent solids in one sensor. It is suitable for potable water monitoring, filter monitoring, mixed liquor suspended solids monitoring, sludge monitoring centrate monitoring, filtrate monitoring and other applications where a traditional turbidity meter or suspended solids analyser would be used.

ICP Electronics WStrider-200 A rugged embedded controller

26 July, 2010 | Supplied by: ICP Electronics Australia

The WStrider-200 A rugged embedded controller is designed to operate under harsh conditions.

Burkert LFC (liquid flow controller)

26 July, 2010 | Supplied by: Burkert Fluid Control Systems

The LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.