LinMot P10-70 series of motors

Monday, 29 October, 2012 | Supplied by: Motion Technologies Pty Ltd

Swiss company LinMot has released a motor series that can be run from most three-phase brushless servo drives. The P10-70 series of motors can provide peak forces up to 2500 N, velocities up to 8 m/s, accelerations up to 90 g and provide long wear free of force, velocity or position control.

LinMot stators are nickel-plated iron, while the slider surface is stainless steel for longer life and corrosion protection. The series has a stator body diameter of 70 mm, with available strokes from 180 to 500 mm.

The motors use non-contact, integral position feedback using 1 Vpp sin/cos signals. This enables 10 µm resolution, ±20 micron repeatability and good linearity.

Options include mounting flanges and cooling mounting flanges, and blower kits to extend motor performance.

LinMot motor systems can be retrofitted into existing applications.

Phone: 02 9524 4782
Related Products

Innopro BoxFlash compact flash pasteuriser

Now compatible with the glass, can and PET container segments, its compact design means users...

Dwyer Instruments Series EDA Electronic Pressure Controller

The Series EDA Electronic Pressure Controller can replace a separate gauge, two switches and a...

CDP301 hydrocarbon and water dewpoint tester

The product uses the chilled mirror technique for accurate measurements of both hydrocarbon and...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd