Turbimax CUS52D turbidity sensor
02 April, 2015Endress+Hauser has introduced the Turbimax CUS52D turbidity sensor for process water filtration and other industrial process turbidity conditions.
Leuze electronic RSL 400 series safety laser scanner
10 February, 2015Leuze electronic has developed the RSL 400 series safety laser scanner.
FCI ST100 aeration flow meter with Profibus Bus PA
04 November, 2014Fluid Components International's ST100 Thermal Mass Flow Meter is suitable for use in wastewater treatment plants for flow measurement in aeration basins. It is Profibus PA compatible, providing accuracy combined with digital bus communication flexibility.
Emerson Process Management Rosemount 5402 non-contacting radar level transmitter
03 November, 2014Emerson Process Management has released the Rosemount 5402 non-contacting radar level transmitter for demanding bulk solids level measurement applications. The high-frequency, 2-wire radar uses Rosemount Radar Master software and unique algorithms to overcome the specific challenges of solids level measurement in vessels, bins and silos, such as inclining or sloping surfaces, low dielectric properties and high filling rates.
ifm efector PN pressure sensor
27 August, 2014The PN series of pressure sensors from ifm has been updated.
ifm efector VSE range for condition monitoring
27 August, 2014The VSE product range from ifm efector provides a combination of machine protection and process monitoring.
Dwyer Instruments Series CDTA carbon dioxide transmitters
30 June, 2014The Series CDTA are combination sensors which measure carbon dioxide, humidity and temperature and transmit the measurements to the building controller.
Exair Digital Flowmeters
27 June, 2014Exair's Digital Flowmeters provide a way to monitor compressed air consumption and waste. With the addition of six extra sizes, the company makes it easier to measure consumption and identify trends at all of the critical areas or individual legs of a compressed air system.
Dwyer Instruments Series WD3 Water Leak Detector
17 June, 2014Dwyer Instruments has released its Series WD3 Water Leak Detector. The device detects the presence of water in drip pans and air handler units, under raised floors or on floors around sump pumps and drains.
AquaLab TruDry multisample moisture content analyser
23 May, 2014The AquaLab TruDry is a high-precision moisture meter designed for labs that measure the moisture content of 15 or more samples per day. The product can dry up to nine samples at once, saving more than 150 labour hours a year.
Temperature Technology TempReport temperature monitoring system
20 May, 2014TempReport is a temperature monitoring system, directly from wireless T-TEC data loggers to the user's PC in real time. No longer do data loggers need to be collected, connected to a PC, downloaded and put back in the place they monitor.
Sick Inox sensors
16 May, 2014Sick's Inox hygienic sensor solutions are said to contribute to constant increases in efficiency in all areas of the food and beverage industry. The hygienic design and the careful selection of materials used are based on various norms, standards and regulations to ensure safety, should direct contact with food or raw materials occur.
Burkert FLOWave flowmeter
13 May, 2014Burkert's FLOWave flowmeter uses technology incorporating SAW (surface acoustic waves) to facilitate inline flow measurement without the need for any sensors or constrictions inside the measuring tube.
Multiparameter, real-time, inline monitoring - revolutionising QA/QC in the beverage and food industries
13 March, 2014Near infrared technology can be used for the real-time measurement of dissolved CO2, sugars/Brix, alcohol/ethanol and organic acids in the beer, soft drink, spirits, pharmaceutical and food industries. They can also be used to monitor CIP cycles.
GEA Nu-Con Generation 3 Rotor Detection System (RDS)
18 February, 2014GEA Nu-Con's Generation 3 Rotor Detection System (RDS) technology is designed to detect contamination during production while monitoring the condition of the critical components within the rotary valve, warning operators before replacement is required.