PU type pressure transmitters from ifm efector have a response time of 2 ms. The units feature a welded stainless steel housing, a measurement accuracy of <±0.8% and a repeatability of <±0.05%.
Krohne OPTISONIC 8300 is a dedicated ultrasonic flowmeter for the measurement of superheated steam.
The Festo energy-efficiency module MS6-E2M is an intelligent service unit system to automatically monitor and regulate operating parameters for compressed air usage.
The latest innovations in automation, control and instrumentation in food and beverage manufacturing27 April, 2015
Do you want your food or beverage plant to take advantage of the latest innovations in automation, control and instrumentation? Do you know what these innovations are?
Emerson Process Management has introduced the Rosemount 705 Wireless Totalizing Transmitter for installation on new or existing turbine meters or pulse devices to deliver average flow and totalised flow volume over time.
Endress+Hauser has introduced the Turbimax CUS52D turbidity sensor for process water filtration and other industrial process turbidity conditions.
Pilz has released a Slimline version of its PSEN code safety switch which is suitable for assembly on gates, covers and flaps.
Leuze electronic has developed the RSL 400 series safety laser scanner.
Fluid Components International's ST100 Thermal Mass Flow Meter is suitable for use in wastewater treatment plants for flow measurement in aeration basins. It is Profibus PA compatible, providing accuracy combined with digital bus communication flexibility.
Emerson Process Management has released the Rosemount 5402 non-contacting radar level transmitter for demanding bulk solids level measurement applications. The high-frequency, 2-wire radar uses Rosemount Radar Master software and unique algorithms to overcome the specific challenges of solids level measurement in vessels, bins and silos, such as inclining or sloping surfaces, low dielectric properties and high filling rates.
The PN series of pressure sensors from ifm has been updated.
The VSE product range from ifm efector provides a combination of machine protection and process monitoring.
The Series CDTA are combination sensors which measure carbon dioxide, humidity and temperature and transmit the measurements to the building controller.
Exair's Digital Flowmeters provide a way to monitor compressed air consumption and waste. With the addition of six extra sizes, the company makes it easier to measure consumption and identify trends at all of the critical areas or individual legs of a compressed air system.
Dwyer Instruments has released its Series WD3 Water Leak Detector. The device detects the presence of water in drip pans and air handler units, under raised floors or on floors around sump pumps and drains.