Processing > Monitors

ifm efector T, R and C series full-metal inductive sensors

07 June, 2011

ifm has developed three series of full-metal sensors to meet different challenging requirements. The sensors can withstand a high temperature range up to 100°C, have a protection rating of IP69K and feature non-stick coating or a correction factor of K=0.

Torque about improving handling accuracy

31 May, 2011

Dry bulk handling is en route to becoming a precision science with a level of control previously undreamt of, thanks to 20 years of research and development into digital non-contact torque monitoring.

Elpro Ecolog Net wireless sensor logging system

02 May, 2011 by

The Elpro Ecolog Net wireless sensor logging system combines the reliability of the original Elpro Central Monitoring System with added flexibility of wire-free sensors.

ifm efector LMT Series level sensor

28 April, 2011

The LMT Series level sensor can be used as a suitable alternative to tuning-fork level sensors that are prone to false signalling.

Dwyer EMMA environmental multifunction meter

24 April, 2011 by

The model EMMA environmental multifunction meter measures humidity, temperature, air velocity, air flow, sound and light measurements in the one instrument. The large, dual-line 4-digit LCD shows both the current and average reading. For reading measurements in dimly lit areas, the display has a built-in back light. Besides measuring the current and average reading, the meter allows the user to read the minimum, maximum and differential measurement for each of the parameters. Included with the meter is the carrying case, rubber boot, battery and tripod.

Turck LI-Q17 miniature linear displacement sensor

23 April, 2011 by

Designed for very short measuring ranges between 50 and 200 mm, Turck has developed a miniature linear displacement sensor, the LI-Q17, uniting all the positive qualities of customary measuring systems in one solution. The LI-Q17 doesn’t work with a magnetic locator but with the resonant circuit measuring principle, where an object’s position is detected via an inductive oscillating system, consisting of a condenser and a coil. The sensor is able to work reliably where the functionality of a magnetic position device is massively affected by electromagnetic fields - caused by large motors or welding plants.

Beamex MC5 Multifunction NATA Calibrator

21 April, 2011 by

TechRentals has introduced the Beamex MC5 Multifunction NATA Calibrator into its test and measurement rental fleet.

Leuze Electronic AMS 300i laser distance measurement

16 April, 2011 by

The laser distance measurement systems AMS 300i from Leuze Electronic offers a selection of integrated interfaces.

ASM Positape WB17KT series stainless steel tape sensors

22 February, 2011 by

ASM has expanded its line of absolute linear position sensors with the Positape WB17KT series of stainless steel tape sensors with measurement ranges of 3500, 6500 and 10,000 mm. This robust sensor features a good service life in a compact housing specifically designed for rugged and harsh environments.

testo 175 series data loggers

22 February, 2011 by

The testo 175 series data loggers can be characterised by their high level of user-friendliness and security.

Fluid Components International ST51 Air/Gas Flow Meter

22 February, 2011 by

The ST51 Air/Gas Flow Meter from Fluid Components International (FCI) provides industrial plant engineers with a solution for greenhouse gas (GHG) monitoring and supports the EPA’s BACT (Best Available Control Technology) initiative in the US. The flowmeter is suitable for the measurement and monitoring of industrial plant greenhouse gases. It features a no-moving-parts design that’s non clogging and operates over a wide flow range with low-flow sensitivity. Packaged in an explosion-proof transmitter, the calibration is matched to the user’s actual gas composition and installation conditions.

Dwyer Model 450A-1 Digital Pocket Size Carbon Monoxide Meter

22 February, 2011 by

The Model 450A-1 Digital Pocket Size Carbon Monoxide Meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in back light brightens the display.

1551A Ex and 1552A Ex Stik thermometers

22 February, 2011 by

The 1551A Ex and 1552A Ex Stik thermometers provide a precise and durable digital replacement for mercury-in-glass thermometers.

Dwyer Series BDPA Adjustable Differential Pressure Alarm

22 February, 2011 by

The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual setpoint indication is designed for overpressure, vacuum and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without the need for a separate pressure gauge.

Jumo Logoscreen nt paperless data recorder

18 February, 2011 by

The Jumo Logoscreen nt is a paperless data recorder with TFT display, compact flash card and USB interfaces. The modular unit is designed for the acquisition of measurement data (3 to 18 measurement inputs can be implemented internally) and provides a high standard of security to prevent unauthorised access and manipulation of the stored data.

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd