Baldor 6-pole NEMA Foot/Face Mount three-phase AC motors range
22 February, 2011 | Baldor Australia Pty Ltd
The 6-pole NEMA Foot/Face Mount range of three-phase AC motors is suitable for continuous operation in industrial applications. The range has been designed to meet MEPS energy-efficiency regulations. The food and beverage industry uses the slower speed but higher torque of 6-pole motors.
Barrier Group pedestrian separation equipment catalogue
22 February, 2011 | Barrier Group
Barrier Group Pty Ltd has released a 128-page catalogue with a large range of new products and product improvements including an extended product range in the important area of pedestrian separation and impact-absorbing products.
Heat and Control FastBack ClimbBack conveyor and Powder on Demand
22 February, 2011 | Heat and Control Pty Ltd
The FastBack ClimbBack conveyor and Powder on Demand [POD] can be used to increase the efficiency and flexibility of processing lines.
iglidur C210 plain bearing polymer
22 February, 2011 | Treotham Automation Pty Ltd
Increasingly, extreme cleaning cycles are being used in the drinks bottling, food processing and packaging industries. More new, aggressive or more highly concentrated chemicals are used in order to meet the demanding requirements of hygiene and cleanliness and reduce machine downtime.
Primary producer transforming waste into green energy
22 February, 2011 | CST Wastewater Solutions
Clean water and green energy technology from Global Water Engineering (GWE) has been used by Chokyuenyong Industrial in Thailand to cut effluent COD pollution levels at its cassava production plant by more than 95%. The gas from its wastewater has also been extracted to power its boilers and generate electricity for its own use and to sell back to the provincial grid.
Jumo Logoscreen nt paperless data recorder
18 February, 2011 | OneTemp Pty Ltd
The Jumo Logoscreen nt is a paperless data recorder with TFT display, compact flash card and USB interfaces. The modular unit is designed for the acquisition of measurement data (3 to 18 measurement inputs can be implemented internally) and provides a high standard of security to prevent unauthorised access and manipulation of the stored data.
Alfa Laval S-separator
18 February, 2011 | Alfa Laval Pty Ltd
The latest version of the Alfa Laval S-separator offers robustness and greater efficiency that allows the same amount of oil to be handled with a smaller separator. The product is used for engine protection and separation efficiency, particularly in working with demanding residual fuel oils.
Banner Engineering World-Beam QS30AFF400/QS30AF600 mid-range sensors
18 February, 2011 | Micromax Pty Ltd
Banner Engineering has added two mid-range adjustable-field sensors to the World-Beam QS30 range. The QS30AFF400 foreground suppression sensor and the QS30AF600 background suppression sensor use advanced linear imager technology to provide a good sensing solution for a range of industrial applications, including part-in-place detection, feeder-bowl control and package detection on conveyors.
igus iglidur J350 polymer material
18 February, 2011 | Treotham Automation Pty Ltd
The tribo-optimised material iglidur J350 has been added to the igus iglidur J all-round polymer plain bearing range. Maintenance- and lubricant-free plain bearings made of this material can be used up to a continuous service temperature of 180°C and, as a press-fit bushing, offer a high interference fit. Additional axial securing is only necessary in applications with an ambient temperature greater than 150°C.
Sick Lector 620 series image-processing code readers
18 February, 2011 | SICK Pty Ltd
The image-processing code reader Lector 620 series is suitable for all code types and marking methods. It features compact design, industry-compatible integration into different IT environments, intuitive operation and good reading performance for product traceability and protection against product counterfeiting. Variant types in the series include: Eco as the basic variant, Standard as the device for rapid implementation of universal applications, and High Speed for high-speed solutions, among other things, in packaging or document handling as well as DPM for markings applied directly.
Hinds-Bock industrial cake depositors
18 February, 2011 | Bake-Quip Pty Ltd
Hinds-Bock Industrial high-speed, multi-piston, cantilevered depositors are designed to work oven conveyors in production bakeries. These industrial depositors are available in many configurations, including vertical designs to take up a limited amount of space on the line.
Toftejorg TZ-750 Rotary Jet Head cleaning head
18 February, 2011 | Matrix Process Solutions Pty Ltd
The Toftejorg TZ-750 Rotary Jet Head cleaning head for tank washing requirements. The Jet Head provides a 3D indexed impact cleaning over a defined time period, which represents a means of achieving quality assurance in tank cleaning.
Silvent SIS silencers
18 February, 2011 | Spray Nozzle Engineering
Silvent’s safety silencers are designed to handle sensitive systems with large flows that require minimal flow restriction. The silencers are compact in size, provide effective noise suppression and feature a built-in warning indicator that immediately shows any increase in backpressure in the system.
Proseal GT2 tray sealer
17 February, 2011 | Proseal Australia
The GT2 tray sealer is used to reduce waste in soft fruit packaging, while also delivering energy savings, reliable performance and cost efficiency.
SIG Combibloc combiCap lightweight screw cap
17 February, 2011 | Visy Industries
With the screw cap combiCap, SIG Combibloc has expanded its product range by adding a screw cap that weighs just 1.85 g. The closure can be applied to carton packs using existing closure applicators with a minor adjustment.
