Nord Drivesystems SK 200E series frequency inverters
10 September, 2012 | NORD Drivesystems (Aust) Pty LtdSK 200E series frequency inverters from Nord Drivesystems are suitable for applications within a distributed automation concept where drives with a performance between 0.25 and 22 kW are required.
Mettler Toledo Safeline Profile Select metal detector for wet and dry products
10 September, 2012 | Mettler-Toledo LtdThe Profile Select metal detector offers sensitive detection for both wet and dry products on food production lines. Variable frequency technology offers accurate inspection regardless of the moisture content of the product or packaging material.
Sick Bulkscan for measuring volume and mass flows
10 September, 2012 | SICK Pty LtdSick’s Bulkscan can measure volume and mass flows without contact, increasing system availability and avoiding mechanical wear. It also prevents wear by transmitting data on uneven belt loads and belt drift.
Tetra Brik Aseptic 1000 Mid LightCap 24 screw cap
07 September, 2012 | Tetra PakThe Tetra Brik Aseptic 1000 Mid LightCap 24 is Tetra Pak’s lowest cost screw cap, with a combination of pre-laminated hole and Direct Injection Moulding Concept technologies.
Caseus Pro processed cheese formulation software
07 September, 2012 | Gold Peg International Pty LtdCaseus Pro formulation software enables cheese manufacturers to measure, rather than estimate, the functional protein content of their natural cheese ingredients.
Nasco Pipette Filter Sleeve
07 September, 2012 | IntermedThe Nasco Pipette Filter Sleeve fits over a standard 10 mL pipette, allowing users to extract samples through a 330 µm polyethylene filter.
Lloyd TA1 Texture Analyser for food texture analysis
06 September, 2012 | Bestech Australia Pty LtdThe Lloyd TA1 Texture Analyser from Bestech Australia is a cost-effective solution for performing rapid and detailed texture analysis in applications requiring up to maximum 1 kN applied force.
Endress+Hauser Deltabar FMD72 Electronic Differential Pressure measurement system
06 September, 2012 | Endress+Hauser Australia Pty LtdThe Endress+Hauser Deltabar FMD72 Electronic Differential Pressure measurement system uses two pressure sensor modules connected electronically to a single transmitter, eliminating impulse lines and capillaries.
Caterpillar Critical Protection Module UPS system
04 September, 2012 | Caterpillar of Australia LtdThe Caterpillar Critical Protection Module is a UPS system that combines a CAT Flywheel UPS, CAT diesel generator and an Automatic Transfer Switch packaged in a sound-attenuated and factory-tested ISO standard container.
Rotamass LR compact Coriolis flowmeter
30 August, 2012 | Yokogawa Australia Pty LtdDesigned to measure both liquids and gases, the effective turndown of the Rotamass LR Coriolis mass flowmeter is no less than 2000:1 for liquids and 5000:1 for gases.
Banner Engineering SureCross Q45 wireless standard photoelectric sensor
29 August, 2012 | Micromax Pty LtdMicromax Sensors & Automation has announced the Banner Engineering SureCross Q45, a self-contained, wireless standard photoelectric sensor designed for control and monitoring applications.
Loscam trans-Tasman pallet rental service
29 August, 2012 | Loscam LtdLoscam’s trans-Tasman pallet rental service allows Loscam customers in New Zealand and Australia to transfer and dehire pallets after an export shipment.
NDC InfraLab Meat Analyzer for chemical lean (CL) measurements
29 August, 2012 | B-R Controls Pty LtdThe NDC InfraLab Meat Analyzer, which has been approved by AUS-MEAT, provides rapid fat / CL measurements for meat and meat products that are equivalent to the Soxhlet chemical method.
National Instruments PXIe-4357 RTD module
27 August, 2012 | National Instruments Aust Pty LtdThe NI PXIe-4357 RTD module integrates sensor-specific signal conditioning with 24-bit, delta-sigma ADCs to sample all 20 channels at 100 Sa/s and offers typical accuracies of up to 0.09°C.
Telemecanique XUY fully integrated roller sensor
25 August, 2012 | Schneider ElectricThe Telemecanique XUY fully integrated roller sensor uses a multibeam photoelectric sensor across the width of the conveyor and is easily installed between the conveyor rollers.
