Teralba Industries Thermpro heat-transfer system range
26 February, 2013 | Teralba IndustriesThe Thermpro range of heat-transfer systems combines the features of the Dimpleflo and Teralba heat exchangers with a range of control equipment into a skid-mounted system.
Exair 1″ Flat Super Air Nozzle
25 February, 2013 | Compressed Air Australia Pty LtdExair’s 1″ Flat Super Air Nozzle produces a flat 1″ (25 mm) wide airstream with a strong blowing force of 278 grams when mounted 12″ (305 mm) from the target.
Stand Up Sample Bags
25 February, 2013 | IntermedStand Up Sample Bags store flat until ready for use, when the gusseted bottom flattens out, allowing the bag to stand up without the need for a rack or holder.
Stable Micro Systems Ice Cream Cone Support Rig
25 February, 2013 | Arrow ScientificMeasuring key textural parameters such as brittleness, toughness and crispiness, the Ice Cream Cone Support Rig reliably informs cone formulation and design for optimum consumer acceptance and product success.
Key Technology Product Definer hyperspectral imaging spectrometer
22 February, 2013 | Key Technology Australia Pty LtdKey Technology’s Product Definer is a hyperspectral imaging spectrometer that helps Key quickly analyse and evaluate new applications and technologies to develop sorting systems that solve outstanding product-quality problems.
Pfaff-silberblau stainless steel SSP and SHE screw jacks
22 February, 2013 | Motion Technologies Pty LtdPfaff-silberblau has released its stainless steel SSP and SHE screw jacks for extreme environment corrosive applications, including the papermaking process industry, food-grade production and offshore applications.
Mettler Toledo handbook on weigh module integration
22 February, 2013 | Mettler-Toledo LtdMettler Toledo has issued a handbook providing advice on the design and application of load cells and weigh modules for tanks, silos, vessels, hoppers and conveyors.
Markem-Imaje SmartLase CO2 laser coder range
22 February, 2013 | Markem-Imaje Pty LtdMarkem-Imaje has launched a generation of SmartLase CO2 laser coders with performances claimed to be 30% higher than market standards due to its patented SCT (SmartLase Code Technology).
Aerofloat wastewater treatment unit
22 February, 2013 | Aerofloat (Australia) Pty LtdThe compact Aerofloat unit is compact, easy to maintain, has low power requirements and produces a high-quality effluent to meet regulatory standards.
Banner Engineering iVu Vision Machine-Mountable Remote Display for noise-immune monitoring
21 February, 2013 | Micromax Pty LtdThe Banner Engineering Machine-Mountable Remote Display enables users to view the iVu sensor image remotely and serves as a constant monitoring and user programming interface, without interference from electrical noise.
Mettler Toledo weighing and measurement compliance catalogue
21 February, 2013 | Mettler-Toledo LtdFinding the right solution for hazardous weighing practices is a difficult task. To assist manufacturers across a number of industries, Mettler Toledo has published a catalogue, Weighing and Measuring Competence for Your Industry.
Fiber-Lite LMI-6000 fibre-optic illuminator
20 February, 2013 | SciTech Pty LtdThe Fiber-Lite LMI-6000 LED fibre-optic illuminator supports microscopy, laboratory studies and research. It incorporates long-life bright white LEDs with a colour temperature of 6000 K and up to 780 lm at the fibre interface.
GEA DualSlicer meat slicer
20 February, 2013 | GEA AustraliaThe GEA DualSlicer from GEA Food Solutions has two independent grippers that enable it to slice two logs independently with little giveaway. Like its predecessor, the GEA GigaSlicer, it is easy to clean.
Technosoft iPOS360x SX multi-axis motion system
20 February, 2013 | TechnosoftiPOS360x SX allows users to plug in up to four iPOS3602 VX or iPOS3604 VX intelligent drives and provides all the necessary connectors (motor, encoder feedback and I/O signal) for each drive.
Industrial Scientific Tango TX1 single gas monitor
19 February, 2013 | Industrial Scientific CorporationThe Tango TX1 detects carbon monoxide, hydrogen sulfide, sulfur dioxide and nitrogen dioxide. DualSense Technology improves worker safety, regardless of bump test frequency.
