Bronkhorst flow meters and controllers for liquids
02 September, 2019 | AMS Instrumentation & Calibration Pty LtdBronkhorst develops micro to low flow liquid metering instruments based on a thermal mass flow measuring principle.
Beamex CENTRiCAL workshop calibration test bench
27 June, 2019 | AMS Instrumentation & Calibration Pty LtdThe CENTRiCAL workshop calibration test bench is designed to combine ease of use, versatility and ergonomics for performing calibrations in a workshop.
Noshok 20, 25 and 30 series of intelligent pressure and level transmitters
24 May, 2019 | AMS Instrumentation & Calibration Pty LtdThe Noshok 20, 25 and 30 series of intelligent pressure and level transmitters is designed to address the specific requirements of the food and beverage industry.
Bronkhorst EL-FLOW Select mass flow meters/controllers
01 March, 2019 | AMS Instrumentation & Calibration Pty LtdEL-FLOW Select Series Mass Flow Meters/Controllers from Bronkhorst are thermal mass flow meters of modular construction with a 'laboratory style' pc-board housing.
London Electronics economy large displays
01 November, 2018 | AMS Instrumentation & Calibration Pty LtdLondon Electronics' range of general-purpose large displays have a simple yet rugged design that gives long-term reliability and a smart appearance.
Michell Instruments QCM601 moisture analyser
10 October, 2018 | AMS Instrumentation & Calibration Pty LtdMichell Instruments' QMA601 process moisture analysers provide moisture control over long periods without the need for frequent maintenance.
Katronic clamp-on flowmeters
01 September, 2018 | AMS Instrumentation & Calibration Pty LtdKatronic flowmeters are hygienic, quick to install, and easy to operate and maintain.
Michell Instruments 2-wire Easidew dewpoint transmitter
20 July, 2018 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has introduced a new version of its 2-wire Easidew dewpoint transmitter, with a simultaneous analog and digital Modbus RTU output and a rugged 5-pin M12 electrical connection.
Michell Instruments QMA401 low-maintenance trace moisture analyser
27 June, 2018 | AMS Instrumentation & Calibration Pty LtdMichell Instruments' QMA401 low-maintenance trace moisture analyser has a new look and enhanced usability.
Fluid Components International ST50 Flow Meter Series air blowers and dryers
14 June, 2018 | AMS Instrumentation & Calibration Pty LtdThe ST50 Mass Flow Meter Series from Fluid Components International (FCI) provides precision measurement of air to increase the efficiency of industrial air blowers and dryers used in raw materials production.
ECD Model HCA1 Portable Colorimetric Chlorine Test Kit
01 June, 2018 | AMS Instrumentation & Calibration Pty LtdThe Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit is suitable for testing free and total chlorine in drinking water, waste water, environmental waters, cooling towers and rinse waters in the food and beverage industry.
Fluid Components International FLT93 Flow Switch
08 March, 2018 | AMS Instrumentation & Calibration Pty LtdThe FLT93 Flow Switch from Fluid Components International (FCI) provides an early warning alert to the potential of dry running conditions, cavitation and other pump issues that can lead to emergency shutdowns, service interruptions and unplanned maintenance.
ECD FC80 free chlorine analyser
01 March, 2018 | AMS Instrumentation & Calibration Pty LtdThe ECD FC80 is a panel-mounted, ready-to-use free chlorine analyser designed to monitor free chlorine in drinking water, rinse water, cooling water or other fresh water samples.
Beamex LOGiCAL cloud-based calibration certificate generation software
22 November, 2017 | AMS Instrumentation & Calibration Pty LtdBeamex has introduced a free-of-charge, cloud-based calibration certificate generation software called LOGiCAL.
Fluid Components International ST51 Series Thermal Mass Flow Meter
09 November, 2017 | AMS Instrumentation & Calibration Pty LtdThe rugged ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) provides continuously accurate measurement of syngas fuel flow to the combined heat and power (CHP) engine.