AMS Instrumentation CDP301 Condumax Dew-Point Tester
22 July, 2020 | AMS Instrumentation & Calibration Pty LtdThe CDP301 Condumax Dew-Point Tester is designed to perform hydrocarbon water dew-point measurements, using a chilled mirror measurement principle.
Michell Instruments XTP501 Oxygen Analyser
01 June, 2020 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has launched a lightweight oxygen analyser that is designed to provide accurate and cost-effective control of oxygen from 500 ppm O2 to oxygen purity in safe area applications.
Katronic dual-path ultrasonic flowmeter
14 May, 2020 | AMS Instrumentation & Calibration Pty LtdLightweight and portable, the Katronic dual-path ultrasonic flowmeter is designed to measure and detect disturbances in flow.
Bronkhorst Fluidat on the Net database
01 March, 2020 | AMS Instrumentation & Calibration Pty LtdThe Fluidat online calculation tool is designed for the calibration of flow meters and controllers, and can calculate pressure differences and valve seats.
AMS Instrumentation ST80 thermal flow meter
04 February, 2020 | AMS Instrumentation & Calibration Pty LtdThe ST80 is a high-performance air/gas flow meter that provides a solution for industrial processes and plant applications, with direct mass flow measuring.
Optek Haze Control 4000 converter
01 November, 2019 | AMS Instrumentation & Calibration Pty LtdThe optek Haze Control 4000 is a microprocessor-based converter that is engineered for high precision haze (turbidity) measurements.
Optek OPT0006 Centrifuge Control
13 September, 2019 | AMS Instrumentation & Calibration Pty LtdInstallation of optek sensors at the inlet and outlet of a centrifuge can improve separation performance, reduce losses and improve product consistency.
Bronkhorst flow meters and controllers for liquids
02 September, 2019 | AMS Instrumentation & Calibration Pty LtdBronkhorst develops micro to low flow liquid metering instruments based on a thermal mass flow measuring principle.
Beamex CENTRiCAL workshop calibration test bench
27 June, 2019 | AMS Instrumentation & Calibration Pty LtdThe CENTRiCAL workshop calibration test bench is designed to combine ease of use, versatility and ergonomics for performing calibrations in a workshop.
Noshok 20, 25 and 30 series of intelligent pressure and level transmitters
24 May, 2019 | AMS Instrumentation & Calibration Pty LtdThe Noshok 20, 25 and 30 series of intelligent pressure and level transmitters is designed to address the specific requirements of the food and beverage industry.
Bronkhorst EL-FLOW Select mass flow meters/controllers
01 March, 2019 | AMS Instrumentation & Calibration Pty LtdEL-FLOW Select Series Mass Flow Meters/Controllers from Bronkhorst are thermal mass flow meters of modular construction with a 'laboratory style' pc-board housing.
London Electronics economy large displays
01 November, 2018 | AMS Instrumentation & Calibration Pty LtdLondon Electronics' range of general-purpose large displays have a simple yet rugged design that gives long-term reliability and a smart appearance.
Michell Instruments QCM601 moisture analyser
10 October, 2018 | AMS Instrumentation & Calibration Pty LtdMichell Instruments' QMA601 process moisture analysers provide moisture control over long periods without the need for frequent maintenance.
Katronic clamp-on flowmeters
01 September, 2018 | AMS Instrumentation & Calibration Pty LtdKatronic flowmeters are hygienic, quick to install, and easy to operate and maintain.
Michell Instruments 2-wire Easidew dewpoint transmitter
20 July, 2018 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has introduced a new version of its 2-wire Easidew dewpoint transmitter, with a simultaneous analog and digital Modbus RTU output and a rugged 5-pin M12 electrical connection.
