AZO cyclone screener Type DA 650 Vario
28 June, 2012The Type DA 650 Vario cyclone screener removes the need for an additional upstream dosing unit, due to the built-in, self-dosing device.
Flexicon Multi-Purpose Filler for dispensing bulk solid materials
13 June, 2012Flexicon’s Multi-Purpose Filler dispenses bulk solid materials into boxes, drums and bulk bags by weight.
Flexicon mobile half-frame bulk bag unloader
17 May, 2012Flexicon’s mobile half-frame bulk bag unloader with multipurpose hopper allows material to be discharged from bulk bags, manually tipped from sacks and conveyed to downstream processes and storage vessels dust-free.
igus RX swarf-resistant energy chain
17 May, 2012igus claims its RX plastic energy tube is almost 100% airtight, with the result of 2.7 g chips after 251,900 cycles during testing. The company has also carried out underwater tests to comply with the absolute airtight requirement, IP40, TÜV Saarland.
Matcon IBC-based Powder Packer
15 May, 2012The Powder Packer module is designed to fill B2B sacks directly from Matcon IBCs without the need for secondary feeders.
Banner Engineering R-GAGE series radar-based sensors for collision avoidance
14 May, 2012The R-GAGE series of radar-based sensors capable of detecting large objects in challenging outdoor situations has been introduced by Banner Engineering. R-GAGE sensors support collision avoidance and vehicle management applications in container ports, traffic and parking systems, manufacturing, mining, materials handling and railways.
Warequip launches new website
01 May, 2012Warequip has launched a website (palletlifting.com.au) which is designed “to aid its distributors in helping customers get the right product while improving revenue and profits”.
Modular gripper systems
02 March, 2012Modular gripper systems from SAS Automation comprise extruded alloy profiles in seven sizes which are secured by a standard range of connectors and clamps to provide the basic gripper frame.
Toyota 8FBN series electric forklifts
09 February, 2012Toyota Material Handling Australia (TMHA) has launched its 8FBN range of four-wheel, counter-balance, battery electric forklifts.
Flexicon Block-Buster bulk bag conditioner for loosening solidified material
20 January, 2012Flexicon has launched the Block-Buster bulk bag conditioner for loosening material that has solidified during storage and shipment.
Patane Produce lifts productivity with Toyota Materials Handling
11 January, 2012Patane Produce commissioned three 1.8-tonne Toyota 8FG18 forklifts at the end of 2011 to increase production and improve the reliability of its material handling fleet.
Crown CDV180S-7 18-tonne lift truck
22 December, 2011The Crown CDV180S-7 18-tonne lift truck is claimed to offer more power than any other comparable IC vehicle. With a 1200 cm load centre, the CDV180S-7 delivers high levels of capability and capacity. The lift truck has a Tier 3 electronic control 254 HP 7.6l diesel engine that provides high torque at low revs, reduces fuel consumption and meets or exceeds current environmental requirements.
Vacuum assisted lifting aids productivity
27 October, 2011Kockums Bulk Systems has installed Tawi vacuum-assisted lifting systems at Zetco. The systems have resulted in improved handling of boxes and cartons of valves with improvements in productivity and safety.
Goudsmit Magnetics magnetic grab heads
06 September, 2011The magnetic grab heads from Goudsmit Magnetics hold steel objects in a firm grip. Once a grab head magnet has been switched on it does not let go again, even if the air pressure drops or if there is a power cut.
Handling cardboard boxes and sacks in the pharma industry
29 August, 2011Handling goods in the pharmaceutical industry is subject to a large number of requirements. The industry is characterised by national and international regulations resulting in high standards in the areas of quality as well as process and product safety. These not only affect the entire production process but are also employed in pharma logistics. This means that for storage and transport processes, companies not only have to observe various environment requirements, as in the case of production under clean room conditions or handling of hazardous goods, but also labour law regulations.
