Pelican Pack and Take ‘n Go liquid spill stations
26 July, 2010 | Revolution Materials
The Pelican Pack and Pelican Take ‘n Go are mobile and wall-mounted stations for cleaning up liquid spills. The cotton-based Fibercan absorbs oils, hydrocarbons (eg, petrol, kerosene) and water-based liquids and uses up to eight times less absorbent material than traditional media. Any excess Fibercan is separated out and kept for re-use.
ISDL intrinsically safe temperature/humidity data logger
26 July, 2010 | Dwyer Omega (Aust) Pty Ltd
The series ISDL intrinsically safe temperature/humidity data logger accurately records temperatures that range from -40 to 80°C. The easy-to-use DL700 software makes retrieving data simple and allows for user-selectable sampling rates. The device can easily be started and stopped from a PC or delayed to start up to six months in advance.
SEW-Eurodrive KES37 and RES37 stainless steel gear units
26 July, 2010 | SEW-Eurodrive Pty Ltd
The KES37 and RES37 stainless steel gear units feature casings and shafts made from stainless steel, inherently suitable for aseptic applications where caustic/high-pressure washdowns are required or where there is potential for product contamination.
Beijer Electronics Exter T150-st stainless steel HMI
26 July, 2010 | Global Automation Asia-Pacific Pty Ltd
Beijer Electronics has added the T150-st to its Exter series of operator panels. The Exter T150-st has an acid-resistant stainless steel construction, so it is suited to those situations where acid-based cleaning agents are used.
Donaldson Filter Buddy portable filtration unit
26 July, 2010 | Donaldson Australasia Pty Ltd
Filter Buddy is a heavy-duty, handheld portable filtration system that allows operators to kidney loop reservoirs that normally cannot be done with larger filter carts.
CRIUS Solisense turbidity meter
26 July, 2010 | Bintech Systems Pty Ltd
The CRIUS Solisense turbidity meter ranges from 0.02 NTU (FTU) to 8% solids and is claimed to be unique in its ability to measure from NTU to percent solids in one sensor. It is suitable for potable water monitoring, filter monitoring, mixed liquor suspended solids monitoring, sludge monitoring centrate monitoring, filtrate monitoring and other applications where a traditional turbidity meter or suspended solids analyser would be used.
Fluid Components International FS10A flow switch/monitor
26 July, 2010 | AMS Instrumentation & Calibration Pty Ltd
The Model FS10A flow switch/monitor from Fluid Components International (FCI) is a low-cost solution for continuously verifying flows within liquid or gas process analyser sampling systems. It is suitable for the continuous monitoring of analyser sample flows to provide the highest integrity process analysis without interruption.
SMC Pneumatics Series C55, double-acting, single-rod cylinders
26 July, 2010 | SMC Australia | New Zealand
Series C55, double-acting, single-rod, air-operated cylinders offer high performance and ISO 21287 compliance.
ICP Electronics WStrider-200 A rugged embedded controller
26 July, 2010 | ICP Electronics Australia
The WStrider-200 A rugged embedded controller is designed to operate under harsh conditions.
BASF Ecovio plastic
26 July, 2010 | BASF Australia Ltd
The latest release of the Ecovio range from BASF can be used to make 100% compostable and biodegradable plastic bags which meet European standard EN 13432 and Australian standard AS 4736.
Burkert LFC (liquid flow controller)
26 July, 2010 | Burkert Fluid Control Systems
The LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.
Parker CCIMS level-flange integrated DP manifold concept
26 July, 2010 | Parker (Aust) Pty Ltd
The CCIMS level-flange, a highly integrated manifold concept from Parker Hannifin, is designed to offer users a simpler means of installing level measurement instrumentation to process tanks and vessels.
MTA range of DE refrigerated air dryer
26 July, 2010 | SCS Filtration Pty Ltd
SCS Filtration has a comprehensive range of refrigerated air dryers. The MTA range of DE dryers is available in sizes ranging from 0.3m3/min (9 cfm) to 37.5m3/min (1324 cfm) and in Australia with stocked dryer sizes from 20 to 494 cfm.
Amalgamated Instruments TP488 scanning monitors
26 July, 2010 | Amalgamated Instrument Co
The TP488 range of scanning monitors offers eight channels of input with eight configurable setpoint relays. These products are suitable for multipoint monitoring of analog transducers or temperature sensors.
Siemens Simatic CPU 317TF-2DP controller
26 July, 2010 | Siemens Ltd
The Simatic CPU 317TF-2DP controller from Siemens implements motion control, safety and standard tasks in one device. The controller utilises PLCopen-compatible motion control blocks and is suitable for coupled motion sequences of multiple axes.
