Fluid Components International ST51 Air/Gas Flow Meter
22 February, 2011 | AMS Instrumentation & Calibration Pty Ltd
The ST51 Air/Gas Flow Meter from Fluid Components International (FCI) provides industrial plant engineers with a solution for greenhouse gas (GHG) monitoring and supports the EPA’s BACT (Best Available Control Technology) initiative in the US. The flowmeter is suitable for the measurement and monitoring of industrial plant greenhouse gases. It features a no-moving-parts design that’s non clogging and operates over a wide flow range with low-flow sensitivity. Packaged in an explosion-proof transmitter, the calibration is matched to the user’s actual gas composition and installation conditions.
ASM Positape WB17KT series stainless steel tape sensors
22 February, 2011 | Automated Control Pty Ltd
ASM has expanded its line of absolute linear position sensors with the Positape WB17KT series of stainless steel tape sensors with measurement ranges of 3500, 6500 and 10,000 mm. This robust sensor features a good service life in a compact housing specifically designed for rugged and harsh environments.
Alfatek bottling lines
22 February, 2011 | ABEVE
ABEVE has been appointed the Australian distributor for Italian bottling line manufacturer Alfatek.
On Site Generating Solutions Pressure Swing Adsorption nitrogen plants
22 February, 2011 | On Site Generating Solutions
On Site Generating Solutions offers an extensive range of nitrogen gas generators (PSA and membrane systems) to meet the flow and purity requirements of beverage, food processing and packaging applications.
SSP Pumps Series A Rotary Lobe Pump
22 February, 2011 | Matrix Process Solutions Pty Ltd
SSP Pumps has released into Australia the Series A Rotary Lobe Pump for applications within general industry, mining, chemical and wastewater.
OEM solutions
22 February, 2011 | Rockwell Automation Australia
The exhibition will highlight the powerful range of product selection and system configuration tools available from Rockwell Automation to assist OEMs in choosing the correct solution for a specific application. These are freely available via the Rockwell Automation Integrated Architecture website and are designed to help users plan and configure the Rockwell Automation systems into their design. Company experts will be on hand during the exhibition to provide advice and insight into the portfolio.
Baldor 6-pole NEMA Foot/Face Mount three-phase AC motors range
22 February, 2011 | Baldor Australia Pty Ltd
The 6-pole NEMA Foot/Face Mount range of three-phase AC motors is suitable for continuous operation in industrial applications. The range has been designed to meet MEPS energy-efficiency regulations. The food and beverage industry uses the slower speed but higher torque of 6-pole motors.
Exair Long Super Ion Air Knives
22 February, 2011 | Compressed Air Australia Pty Ltd
Exair’s Long Super Ion Air Knives neutralise static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and 3D shapes up to 2438 mm across. The wide laminar airstream full of static eliminating ions is effective at high speeds and provides good cleaning up to 6.1 m away. Poor print quality, dust attraction, tearing, jamming and related equipment downtime can be eliminated.
Heat and Control FastBack ClimbBack conveyor and Powder on Demand
22 February, 2011 | Heat and Control Pty Ltd
The FastBack ClimbBack conveyor and Powder on Demand [POD] can be used to increase the efficiency and flexibility of processing lines.
Barrier Group pedestrian separation equipment catalogue
22 February, 2011 | Barrier Group
Barrier Group Pty Ltd has released a 128-page catalogue with a large range of new products and product improvements including an extended product range in the important area of pedestrian separation and impact-absorbing products.
iglidur C210 plain bearing polymer
22 February, 2011 | Treotham Automation Pty Ltd
Increasingly, extreme cleaning cycles are being used in the drinks bottling, food processing and packaging industries. More new, aggressive or more highly concentrated chemicals are used in order to meet the demanding requirements of hygiene and cleanliness and reduce machine downtime.
Primary producer transforming waste into green energy
22 February, 2011 | CST Wastewater Solutions
Clean water and green energy technology from Global Water Engineering (GWE) has been used by Chokyuenyong Industrial in Thailand to cut effluent COD pollution levels at its cassava production plant by more than 95%. The gas from its wastewater has also been extracted to power its boilers and generate electricity for its own use and to sell back to the provincial grid.
Alfa Laval S-separator
18 February, 2011 | Alfa Laval Pty Ltd
The latest version of the Alfa Laval S-separator offers robustness and greater efficiency that allows the same amount of oil to be handled with a smaller separator. The product is used for engine protection and separation efficiency, particularly in working with demanding residual fuel oils.
Banner Engineering World-Beam QS30AFF400/QS30AF600 mid-range sensors
18 February, 2011 | Micromax Pty Ltd
Banner Engineering has added two mid-range adjustable-field sensors to the World-Beam QS30 range. The QS30AFF400 foreground suppression sensor and the QS30AF600 background suppression sensor use advanced linear imager technology to provide a good sensing solution for a range of industrial applications, including part-in-place detection, feeder-bowl control and package detection on conveyors.
Jumo Logoscreen nt paperless data recorder
18 February, 2011 | OneTemp Pty Ltd
The Jumo Logoscreen nt is a paperless data recorder with TFT display, compact flash card and USB interfaces. The modular unit is designed for the acquisition of measurement data (3 to 18 measurement inputs can be implemented internally) and provides a high standard of security to prevent unauthorised access and manipulation of the stored data.
