ReCoila Gen III FD Series hose reel
22 February, 2011 | Supplied by: ReCoila Pty Ltd
The Gen III FD Series hose reel is specifically designed for use in wineries to dispense CO2 and nitrogen when blanketing vats and tanks during storage, transfer, fermentation and other processes.
SSP Pumps Series A Rotary Lobe Pump
22 February, 2011 | Supplied by: Matrix Process Solutions Pty Ltd
SSP Pumps has released into Australia the Series A Rotary Lobe Pump for applications within general industry, mining, chemical and wastewater.
Vanton Solar Powered Chemical Dosing System
22 February, 2011 | Supplied by: Acromet (Aust) Pty Ltd
The weatherable Solar Powered Chemical Dosing System from Vanton Pump and Equipment Corp features a nonmetallic, peristaltic pump for corrosion-free transfer of caustic and acidic treatment chemicals from an integral thermoplastic storage tank to water and wastewater containment facilities in remote locations.
ASM Positape WB17KT series stainless steel tape sensors
22 February, 2011 | Supplied by: Automated Control Pty Ltd
ASM has expanded its line of absolute linear position sensors with the Positape WB17KT series of stainless steel tape sensors with measurement ranges of 3500, 6500 and 10,000 mm. This robust sensor features a good service life in a compact housing specifically designed for rugged and harsh environments.
1551A Ex and 1552A Ex Stik thermometers
22 February, 2011 | Supplied by: Fluke Australia Pty Ltd
The 1551A Ex and 1552A Ex Stik thermometers provide a precise and durable digital replacement for mercury-in-glass thermometers.
testo 175 series data loggers
22 February, 2011 | Supplied by: Testo Pty Ltd
The testo 175 series data loggers can be characterised by their high level of user-friendliness and security.
Dwyer Model 450A-1 Digital Pocket Size Carbon Monoxide Meter
22 February, 2011 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Model 450A-1 Digital Pocket Size Carbon Monoxide Meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in back light brightens the display.
On Site Generating Solutions Pressure Swing Adsorption nitrogen plants
22 February, 2011 | Supplied by: On Site Generating Solutions
On Site Generating Solutions offers an extensive range of nitrogen gas generators (PSA and membrane systems) to meet the flow and purity requirements of beverage, food processing and packaging applications.
Omron Trajexia motion control system
22 February, 2011 | Supplied by: Omron Electronics Pty Ltd
Trajexia is Omron’s motion platform that provides the performance and the ease of use of a dedicated motion system. It is a stand-alone modular system that allows maximum flexibility and scalability. At the heart of system lies the TJ1 multitasking motion coordinator. Powered by a 32-bit DSP, it can perform motion tasks such as e-cam, e-gearbox, registration control and interpolation, all via simple motion commands.
Dwyer Series BDPA Adjustable Differential Pressure Alarm
22 February, 2011 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual setpoint indication is designed for overpressure, vacuum and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without the need for a separate pressure gauge.
Fluid Components International ST51 Air/Gas Flow Meter
22 February, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The ST51 Air/Gas Flow Meter from Fluid Components International (FCI) provides industrial plant engineers with a solution for greenhouse gas (GHG) monitoring and supports the EPA’s BACT (Best Available Control Technology) initiative in the US. The flowmeter is suitable for the measurement and monitoring of industrial plant greenhouse gases. It features a no-moving-parts design that’s non clogging and operates over a wide flow range with low-flow sensitivity. Packaged in an explosion-proof transmitter, the calibration is matched to the user’s actual gas composition and installation conditions.
ILMAP Filter Nozzle Type P
22 February, 2011 | Supplied by: Tecpro Australia
The Filter Nozzle Type P, designed and manufactured by ILMAP is suitable for the refurbishment of water treatment systems and is available in a range of specifications to suit many different installations. The nozzle can be custom made or users can choose from slot widths ranging from 0.25 to 3 mm, and a wide variety of standard thread and stem sizes.
OEM solutions
22 February, 2011 | Supplied by: Rockwell Automation Australia
The exhibition will highlight the powerful range of product selection and system configuration tools available from Rockwell Automation to assist OEMs in choosing the correct solution for a specific application. These are freely available via the Rockwell Automation Integrated Architecture website and are designed to help users plan and configure the Rockwell Automation systems into their design. Company experts will be on hand during the exhibition to provide advice and insight into the portfolio.
Barrier Group pedestrian separation equipment catalogue
22 February, 2011 | Supplied by: Barrier Group
Barrier Group Pty Ltd has released a 128-page catalogue with a large range of new products and product improvements including an extended product range in the important area of pedestrian separation and impact-absorbing products.
Exair Long Super Ion Air Knives
22 February, 2011 | Supplied by: Compressed Air Australia Pty Ltd
Exair’s Long Super Ion Air Knives neutralise static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and 3D shapes up to 2438 mm across. The wide laminar airstream full of static eliminating ions is effective at high speeds and provides good cleaning up to 6.1 m away. Poor print quality, dust attraction, tearing, jamming and related equipment downtime can be eliminated.
