Kiaro! 200 label printer
08 November, 2013 | Metromatics Pty LtdQuickLabel Systems has introduced the Kiaro! 200 label printer, a wide-width inkjet colour printer designed for the short-run labelling needs of manufacturers of large-size products in the chemical, dietary supplement and food industries.
SPX Gerstenberg Schröder shortening production system
08 November, 2013 | SPX FLOW TECHNOLOGY AUSTRALIA PTY LTDWith SPX's GS system, bulk hydrogenated oil is received and used as input to the shortening production process. After pre-cooling, the oil is pumped through a GS scraped surface heat exchanger (SSHE) to crystallise and a pin rotor machine to knead it to the required consistency.
Krones BEVkeg non-returnable PET beverage keg
07 November, 2013 | JL Lennard Pty LtdBEVkeg from Krones and Micro Matic is an all-inclusive system for the non-returnable PET beverage keg market. It also incorporates the matching, gas-free BEVmate tapping equipment.
Krones Ergomodule modularlised labeller system
06 November, 2013 | JL Lennard Pty LtdAll of Krones’ labellers will from now on be configured from one modularised system. A single, basic, standardised machine will be combined with labelling stations that are either permanently affixed or can be docked onto the basic machine as needed.
Marel Platino Flattener for poultry and meat
04 November, 2013 | MarelAs part of its Meat and Poultry Processing range, Marel has available the Platino Flattener. The flattener improves water-holding capacity and is claimed to give meat products with quality bite, texture and taste.
Key Technology CleanBelt CIP system for ADR 5 for potato strips
04 November, 2013 | Key Technology Australia Pty LtdKey Technology has introduced CleanBelt, a clean-in-place (CIP) system for ADR 5, the company's automatic defect removal system for potato strips. The system reduces sanitation and maintenance labour and minimises the cost of replacement parts.
ifm efector ecolink EVC series connectors with EMC protection
04 November, 2013 | ifm efector pty ltdThe asymmetrically acting saw-tooth contoured vibration protection holds the coupling nut tight in position. In addition to screening, this ensures a low contact resistance between the nut of the connector and the housing of the connected device.
Mecmesin Closure Torque Tester range
01 November, 2013 | SI InstrumentsThe complete range of Mecmesin Closure Torque Testers is available in Australia and New Zealand through SI Instruments.
Thermo Fisher Extraction of Total Fat from Food Samples application note
01 November, 2013 | Thermo Fisher ScientificThermo Scientific has available an application note that explains how the ability to extract pretreated matrices using accelerated solvent extraction can increase laboratory productivity.
DuPont BAX System for detecting Shiga toxin-producing E. coli
31 October, 2013 | DuPont Australia Pty LtdThe DuPont BAX System has been certified by the AOAC Research Institute as a Performance Tested Method (PTM) for detecting Shiga toxin-producing E. coli (STEC) in beef trim and ground beef.
Milestone DMA-80 and DMA-1 Direct Mercury Analysers
31 October, 2013 | In Vitro Technologies Pty Ltd
The Mercury analyser range from Milestone gives accurate results in fewer than five minutes with no sample preparation time required.
DFC Packaging DeLight hybrid ovenable tray range
30 October, 2013 | DFC Packaging GroupDFC Packaging has announced the arrival of its range of hybrid ovenable cardboard/plastic rimmed trays. DeLight is a type of hybrid package in which renewable paperboard is enhanced with polymers.
Schneider Electric MGE Galaxy 5500 UPS
30 October, 2013 | Schneider ElectricSchneider Electric has released the MGE Galaxy 5500 UPS. Its online technology fully isolates and protects against all power-quality disturbances, even in demanding environments. The efficient double conversion or ECO mode is said to provide savings in energy costs.
Personalised overcaps for champagne and sparkling wine
30 October, 2013 | Amcor GlobalAmcor Flexibles has launched MyCoiffe personalised champagne and sparkling wine overcaps. The company offers a short lead time, with overcaps claimed to be available in less than two weeks.
Multipac e-concept thermoforming packaging machines
29 October, 2013 | MULTIVAC Australia Pty LtdMultipac has developed several solutions for reducing the consumption of film material, energy and water in the packaging procedure and has integrated these into several of its thermoforming packaging machines.
