LinkIQ-IE Cable+Network Industrial Ethernet Tester

Thursday, 15 April, 2021 | Supplied by: Fluke Networks


Fluke Networks’ LinkIQ-IE Cable+Network Industrial Ethernet Tester is designed to troubleshoot network cabling, which is claimed to be the leading cause of industrial Ethernet failures.

The technology is based on a single-test approach that automatically provides the appropriate measurements based on what’s at the other end of the cable. For an open cable, it shows the length and pairing. If it’s terminated with the supplied remote, the test result shows the maximum data rate the cable can support — up to 10 Gbps. If the cable is connected to a switch port, the technology will show the name of the switch plus the port name, speed and duplex. If PoE is advertised, it will display the power and class (up to 90 W or Class 8) and then load the switch to verify the power can be delivered.

The product also features an RJ-45 type connector and includes cabling and adapters, simplifying connection to M12-D, M12-X and M8-D connectors commonly used in industrial applications.

Online: www.flukenetworks.com
Phone: 02 8850 3333
Related Products

igus iglidur AX500 food-contact plain bearings

Plain bearings made of the new iglidur AX500 high-performance polymer from Treotham help make...

tna robag 3e VFFS system

This bagging system has connectivity features to boost efficiency and is able to deliver up to...

Metromatics MEZ-E1553 embedded mezzanine board

The mini mezzanine board is built to work on MIL-STD-1553 networks and is equipped with Ethernet...


  • All content Copyright © 2021 Westwick-Farrow Pty Ltd