Dynafluid 2000 steam and water mixing valve

The Dynafluid 2000 steam and water mixing valve, available from TecPro Australia, combines steam with cold water to deliver a constant flow of hot water without the need to install water heating and pumping systems.

The steam inlet valve is controlled directly by the cold water pressure, opening only when water is flowing into the chamber. As soon as cold water pressure in the chamber drops below 1 bar, the steam valve shuts off completely, ensuring that steam cannot escape through the outlet.

The valve is available in four different sizes from 15 to 40 mm, for flow rates up to 350 L/min and operating pressures from 0.5 to 6 bar. The two smaller valve sizes are suitable for hose washdown stations; the two larger valve sizes are suitable for tank filling and multipoint applications where higher flow rates are required. A range of sizes is available, including stainless steel for hygienically controlled environments.

The internal parts are constructed from robust, heat-resistant thermoplastic polymers, giving the valves good operating life even in harsh environments. Should maintenance be necessary, the valve is easy to service without removing any pipework, and a full range of spares is available.

An optional temperature gauge and a hose rack are also available.