Robatech Vivo 18 coating head

The Vivo 18 allows tear strips to be applied to cardboard packaging by direct adhesive application. The same application head can be used to produce silicone release liners cost-efficiently.

High-quality hot melt coatings form the basis for practical tear strips and secure silicone release liners on shipping packaging made of cardboard or paper as well as film. The new Vivo 18 coating head offers the properties needed for this: it is narrow, fast and delivers a precise adhesive application.

Precise means a uniform adhesive application from start to finish — with precise edge definition and clean cut-off. The coating head achieves uniform adhesive application through optimised distribution of the adhesive in the nozzle. The negative-closing jetting element and the ability to finely adjust the nozzle alignment to the substrate ensure a clean cut-off.

Packaging manufacturers can apply unglued tear strips directly to cardboard using the coating head. This is because adhesive application from a width of 2 mm is uniform and precise even at speeds of up to 200 m/min, thus ensuring good adhesion. For silicone release liners, the production speed can even be increased to 250 m/min. Format changes in the application width are easily carried out via exchangeable masks in the nozzle.

The coating head is narrow at 32 mm. Two heads can be mounted next to each other to save space, for flexible variants up to a maximum of two silicone release liners and one tear strip. In addition, the tapered nozzle ensures that adhesive can also be applied close to folded cardboard or the existing tear strip.