VSS VacMount vacuum-mounted vibrator
Emptying hoppers can be a chore when the product doesn’t want to come out. The usual method is hammering, or using a vibrator, properly sized and with the correct action.
But if the hopper isn’t yours then the problem gets worse as you can’t hammer it or attach anything permanently.
Vibration Systems & Solutions (Australia) has a method of holding a vibrator securely to the hopper wall by vacuum. This means that it can be used on any solid-walled container just as a normal vibrator. The wall can even be curved as in a 200 L drum.
The VacMount comes in a variety of sizes which can be fitted with the correct vibrator for the job. No extra piping is required as the vacuum is generated from the same airline that runs the vibrator.
The hopper wall can be metal or plastic, and VSS also offers solutions for woven IBCs.
Phone: 08 9209 1163
Loma Flex Conveyor System
Loma Systems demonstrated its latest detection solutions at Anuga FoodTec in Germany.
Flexicon Twin Tilt-Down flexible screw conveyor on mobile base built to 3-A standard
New from Flexicon is a Twin Tilt-Down Flexible Screw Conveyor system with dual hoppers on a...
NORD LogiDrive Advanced and LogiDrive Basic drive solutions
The NORD LogiDrive solution is an energy-efficient, service-friendly and standardised...