Flexicon Low Profile Flexible Screw Conveyor
Flexicon’s Low Profile Flexible Screw Conveyor with bin and castor-mounted frame can roll below mezzanines and other low-headroom areas, receive material from overhead equipment and discharge the material into process equipment and vessels throughout the plant.
Ready to plug in and run, the self-contained unit features a ‘push-type’ drive system positioned at the lower intake end of the conveyor, versus a standard ‘pull-type’ drive positioned at the upper discharge end of the conveyor, reducing overall height by approximately 610 mm.
At 0.25 m3, the bin accommodates the contents of approximately one-third of a bulk bag measuring 1 x 1 x 1 m, or several typical 25 kg bags, depending on bulk density.
A specialised BEV-CON screw within the straight conveyor tube is engineered to move a range of difficult-to-convey bulk materials that tend to cake, pack, smear or plug, as well as fragile products prone to breakage, with no separation of blends.
With the exception of the polymer tube, all material contact surfaces are of stainless steel finished to food, pharmaceutical, dairy or industrial standards for rapid washdown and/or corrosion resistance.
Phone: 07 3879 4180
The OMRON HD-1500 mobile robot has a heavy payload capacity of up to 1500 kg.
CMTP has received HACCP certification and can now produce a special range of Pal-giene certified...
The Festo EXCT 2-axis linear gantry uses parallel kinematic principles to deliver good dynamic...