Flexicon BULK-OUT Model BFC Bulk Bag Discharger

Thursday, 17 August, 2017 | Supplied by: Flexicon Corporation (Aust) Pty Ltd


Flexicon’s BULK-OUT Model BFC Bulk Bag Discharger features an enclosure to contain errant dust escaping through the seams or fabric of bulk bags when working with unlined bags.

Clear panels on four hinged access doors allow monitoring of the discharging process. A port on the rear panel allows venting of the enclosure to a centralised dust collection system.

Intended for applications in which trace amounts of dust cannot be tolerated or when dusty materials leak through the bag itself, the enclosure works in concert with the discharger’s dust-tight bag spout interface and expands the ability of the discharger to contain dust from all areas of the bag.

To maintain dust control at the bag spout, a manual SPOUT-LOCK clamp ring positioned atop a pneumatically actuated TELE-TUBE telescoping tube enables an operator to make a quick, dust-tight connection between the bag spout and hopper, and to automatically elongate the bag as it empties to promote flow and evacuation.

The telescoping tube raises the clamp ring assembly that seals the clean side of the bag spout to the clean side of the telescoping tube, then lowers until the bag spout is pulled taut. Once the spout is untied, the telescoping assembly exerts continual downward tension on the spout, elongating the bag as it empties. The high-integrity, dust-tight seal between the bag spout and clamp ring allows full-open discharge from the bag without dusting.

A POWER-CINCHER pneumatically actuated flow control valve cinches the bag spout concentrically with no leakage of material, allowing gradual opening of the bag spout as well as retying of partially empty bags.

The discharger is also equipped with FLOW-FLEXER bag activators that raise and lower opposite bottom edges of the bag at timed intervals, loosening compacted materials and promoting material flow into the bag discharge spout. As the bag lightens, the stroke of the bag activators increases, raising the bag into a steep ‘V’ shape, eliminating dead spots for total evacuation of material with no manual intervention.

Online: www.flexicon.com.au
Phone: 07 3879 4180
Related Products

Flexicon Twin Tilt-Down flexible screw conveyor on mobile base built to 3-A standard

New from Flexicon is a Twin Tilt-Down Flexible Screw Conveyor system with dual hoppers on a...

NORD LogiDrive Advanced and LogiDrive Basic drive solutions

The NORD LogiDrive  solution is an energy-efficient, service-friendly and standardised...

Mixquip Series 620-3 High Shear Powder Liquid Mixer

Incorporate powders into liquids faster, more efficiently and cost-effectively with Mixquip's...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd