AZO cyclone screener Type DA 650 Vario
The Type DA 650 Vario cyclone screener removes the need for an additional upstream dosing unit, due to the built-in, self-dosing device. The dosing capacity can be adapted to specific process requirements by means of the frequency converter.
The bulk material enters the dosing screw via the product inlet and is transferred into the screener housing. The dosing rate of the bulk material required for the screening operation can be set to product-specific values by adjusting a frequency converter for the screw speed.
The bulk material is picked up by the separately driven intake distributors with agitator bars and gently swirled through the screen basket. The fines drop through the screen basket into the fines outlet while the coarse material is transferred to the coarse material outlet where it is discharged.
For inspection purposes, the screen basket can be easily pulled out and swivelled to the side of the housing by means of a special extraction device with quick-release fasteners. This enables detailed inspection and fast replacement of the screen if necessary. The dosing screw can also be pulled out and swivelled to the side.
All connections relevant to safety are protected by electrical safety devices which immediately shut down the machine when it is opened. The screen fabric, which is mounted on rings, can vibrate and therefore clean itself automatically. The built-in baffle ensures that too much fine material cannot enter the coarse product outlet.
The screener is retrofittable at any time and is completely extractable without the need for tools.
Phone: 03 9584 8111
The iTRAK 5730 small-frame intelligent track system can improve throughput in multi-product food...
The HGX44e CO2 range of compressors is suitable for industrial low-temperature...
Enmin's range of EMA drives are suitable for the food industry, using a...