Processing > Plant equipment

ReCoila Gen III FD Series hose reel

22 February, 2011 by

The Gen III FD Series hose reel is specifically designed for use in wineries to dispense CO2 and nitrogen when blanketing vats and tanks during storage, transfer, fermentation and other processes.


Baldor 6-pole NEMA Foot/Face Mount three-phase AC motors range

22 February, 2011 by

The 6-pole NEMA Foot/Face Mount range of three-phase AC motors is suitable for continuous operation in industrial applications. The range has been designed to meet MEPS energy-efficiency regulations. The food and beverage industry uses the slower speed but higher torque of 6-pole motors.


Exair Long Super Ion Air Knives

22 February, 2011 by

Exair’s Long Super Ion Air Knives neutralise static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and 3D shapes up to 2438 mm across. The wide laminar airstream full of static eliminating ions is effective at high speeds and provides good cleaning up to 6.1 m away. Poor print quality, dust attraction, tearing, jamming and related equipment downtime can be eliminated.


Primary producer transforming waste into green energy

22 February, 2011

Clean water and green energy technology from Global Water Engineering (GWE) has been used by Chokyuenyong Industrial in Thailand to cut effluent COD pollution levels at its cassava production plant by more than 95%. The gas from its wastewater has also been extracted to power its boilers and generate electricity for its own use and to sell back to the provincial grid.


Primary producer transforming waste into green energy

22 February, 2011

Clean water and green energy technology from Global Water Engineering (GWE) has been used by Chokyuenyong Industrial in Thailand to cut effluent COD pollution levels at its cassava production plant by more than 95%. The gas from its wastewater has also been extracted to power its boilers and generate electricity for its own use and to sell back to the provincial grid.


Poultry enterprise saving water

22 February, 2011

Ovivo has saved the state of Queensland millions of litres of water each day by building an advanced water treatment plant (AWTP) which is claimed to be the first of its kind globally and the first of its scale.


Silvent SIS silencers

18 February, 2011 by

Silvent’s safety silencers are designed to handle sensitive systems with large flows that require minimal flow restriction. The silencers are compact in size, provide effective noise suppression and feature a built-in warning indicator that immediately shows any increase in backpressure in the system.


Banner Engineering World-Beam QS30AFF400/QS30AF600 mid-range sensors

18 February, 2011 by

Banner Engineering has added two mid-range adjustable-field sensors to the World-Beam QS30 range. The QS30AFF400 foreground suppression sensor and the QS30AF600 background suppression sensor use advanced linear imager technology to provide a good sensing solution for a range of industrial applications, including part-in-place detection, feeder-bowl control and package detection on conveyors.


igus iglidur J350 polymer material

18 February, 2011 by

The tribo-optimised material iglidur J350 has been added to the igus iglidur J all-round polymer plain bearing range. Maintenance- and lubricant-free plain bearings made of this material can be used up to a continuous service temperature of 180°C and, as a press-fit bushing, offer a high interference fit. Additional axial securing is only necessary in applications with an ambient temperature greater than 150°C.


Alfa Laval S-separator

18 February, 2011 by

The latest version of the Alfa Laval S-separator offers robustness and greater efficiency that allows the same amount of oil to be handled with a smaller separator. The product is used for engine protection and separation efficiency, particularly in working with demanding residual fuel oils.


Toftejorg TZ-750 Rotary Jet Head cleaning head

18 February, 2011 by

The Toftejorg TZ-750 Rotary Jet Head cleaning head for tank washing requirements. The Jet Head provides a 3D indexed impact cleaning over a defined time period, which represents a means of achieving quality assurance in tank cleaning.


HepcoMotion SBD sealed belt drive

16 February, 2011 by

HepcoMotion SBD sealed belt-driven units are offered in standard and cleanroom configurations, come in two sizes and are claimed to provide a higher level of performance in terms of load capacity and life than other comparably sized systems.


Dodge ISN end covers

07 January, 2011 by

A range of end covers has been introduced to the Dodge ISN bearing range. The product provides an additional barrier to contamination in the harshest of applications.


Geelen counterflow dryers and coolers

07 January, 2011 by

Geelen counterflow dryers and coolers exclusively use the counterflow principle which is claimed to be the most efficient method to exchange energy between any two flows of gases, liquids or solids. By applying this principle in the dryers, users can minimise the amount of drying air needed and maximise the amount of energy that can be transferred. This results in a lower air exhaust volume and a lower exhaust air temperature.


Boge SO 150-2 to SO 269-2 oil-free, water-cooled screw compressors

07 January, 2011 by

Boge has launched its second-generation SO 150-2 to SO 269-2 oil-free, water-cooled screw compressors. Increased efficiency, improved volume flow and lower sound pressure values are just some of the developments which have been made.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd