Flexicon Tip-Tite drum dump feeder
02 November, 2010 | Supplied by: Flexicon Corporation (Australia) Pty Limited
The Tip-Tite drum dump feeder seals drums against a discharge cone, tips the drum and feeds bulk material into downstream equipment, dust free, at controlled rates.
Fresco basic design bulk bag fillers
02 November, 2010 | Supplied by: Fresco NZ Ltd
Fresco has extended its range of bulk bag fillers to include a low-cost basic design.
Lynchborough-GPM food equipment design and construction
02 November, 2010 | Supplied by: Lynchborough - GPM
Lynchborough-GPM focuses on the design and construction of high-quality equipment and systems for the food industry.Â
Güdel gantry robots
02 November, 2010 | Supplied by: CNC Design Pty Ltd
Güdel gantry systems are claimed to expand users’ horizontal and vertical reach for a diverse range of materials handling requirements.
Warequip manual and electric range of walkie stackers
02 November, 2010 | Supplied by: Warequip
Warequip’s range of walkie stackers includes manual units through to electric units in both straddle-legged and fork-over units. Capacities range from 500 to 1000 kg with lift heights ranging from 1600 to 3000 mm.
Big tanks
06 October, 2010 | Supplied by: The Tasman Tank Co
The Tasman Tank Co, which produces more than 200 large industrial and municipal tanks a year, says advances in specifying, design, protective coatings, manufacture and installation need to be understood to get the best results for particular industries and applications. The company says these changes are particularly important to the resources, energy and ‘green’ environmental processing industries.
Mixed case palletising solutions
06 October, 2010 | Supplied by: Dematic Pty Ltd
Driven by OHS concerns and skills shortages, there is an increasing demand for smart solutions that take mixed case palletising in a new and exciting direction. Advances in software, robotics and intelligent storage, buffering and sequencing systems have enabled the development of two innovations designed to reduce the cost and improve the efficiency, productivity and safety of building mixed case pallets.
Fresco compression loadcells
06 September, 2010 | Supplied by: Fresco NZ Ltd
The low-profile compression loadcell mounting kit is designed for silo and tank weighing applications. With in-built overturning restraints suitable for zone 4 earthquake regions, no other load restraint devices are required. Kit heights as low as 125 mm ensure they can be easily retrofitted to existing silos, removing the reliance on level sensors and providing a higher degree of accuracy for stock control and delivery validation.
Enmin’s EVFLT electromagnetic vibratory feeder drives
06 September, 2010 | Supplied by: Enmin Pty Ltd
Enmin’s EVFLT electromagnetic vibratory feeder drives are fifth-generation units that offer the same degree of reliability as previous versions but with improved components. The overall dimensions and footprint remain the same, therefore the latest drives are interchangeable with the earlier models but offer better overall performance.
Converging Solutions Pack Integrator and Collator systems
06 September, 2010 | Supplied by: Inspection Systems Pty Ltd
Inspections Systems has secured the distributorship for Converging Solutions in Australia and New Zealand. Based in the UK, Converging Solutions is a supplier of converging and pack handling equipment in the packaging industry.
OCME palletising manipulators
03 September, 2010 | Supplied by: HBM Packaging Technologies
OCME has extended its range of palletising machines to include layer forming systems that use manipulators - designed to handle fragile products and multipacks.
Flexicon bulk conveyor with tilt-down portable base
03 September, 2010 | Supplied by: Flexicon Corporation (Australia) Pty Limited
A bulk conveyor with tilt-down portable base that fits through tight spaces and provides easy access for removal of the flexible screw has been released.
tna roflo HM 3 transfer and distribution system
03 September, 2010 | Supplied by: TNA Solutions Pty Ltd
The roflo HM 3 transfer and distribution system is an electromagnetically driven horizontal motion conveyor.
Metrological testing at Metarom
03 September, 2010 | Supplied by: Mettler-Toledo Ltd
Ensuring measurement traceability and accuracy is an integral part of the quality-centric approach of Metarom, a French producer of flavours and colours for the food industry.
Mettler Toledo IND131/IND331 weighing terminals
03 September, 2010 | Supplied by: Mettler-Toledo Ltd
The IND131/IND331 series of industrial process weighing terminals and transmitters is claimed to deliver equipment that offers comprehensive application features, speed and connectivity.
