Lynchborough-GPM food equipment design and construction
02 November, 2010 | Supplied by: Lynchborough - GPM
Lynchborough-GPM focuses on the design and construction of high-quality equipment and systems for the food industry.Â
Dematic RapidPick ergonomic picking stations
02 November, 2010 | Supplied by: Dematic Pty Ltd
Picking rates of up to 1800 items per hour are made possible through the innovative configuration of RapidPick stations, which can be fully tailored to match operators’ individual requirements.
Gough Econ Elecon bucket conveyor and elevator system
02 November, 2010 | Supplied by: Australis Engineering Pty Ltd
Gough Econ has released the mid-size Elecon bucket conveyor and elevator system which has a larger capacity bucket design for higher throughput and applications beyond typical dry bulk-material handling.
Güdel gantry robots
02 November, 2010 | Supplied by: CNC Design Pty Ltd
Güdel gantry systems are claimed to expand users’ horizontal and vertical reach for a diverse range of materials handling requirements.
Flexicon Tip-Tite drum dump feeder
02 November, 2010 | Supplied by: Flexicon Corporation (Australia) Pty Limited
The Tip-Tite drum dump feeder seals drums against a discharge cone, tips the drum and feeds bulk material into downstream equipment, dust free, at controlled rates.
Warequip manual and electric range of walkie stackers
02 November, 2010 | Supplied by: Warequip
Warequip’s range of walkie stackers includes manual units through to electric units in both straddle-legged and fork-over units. Capacities range from 500 to 1000 kg with lift heights ranging from 1600 to 3000 mm.
Mixed case palletising solutions
06 October, 2010 | Supplied by: Dematic Pty Ltd
Driven by OHS concerns and skills shortages, there is an increasing demand for smart solutions that take mixed case palletising in a new and exciting direction. Advances in software, robotics and intelligent storage, buffering and sequencing systems have enabled the development of two innovations designed to reduce the cost and improve the efficiency, productivity and safety of building mixed case pallets.
Big tanks
06 October, 2010 | Supplied by: The Tasman Tank Co
The Tasman Tank Co, which produces more than 200 large industrial and municipal tanks a year, says advances in specifying, design, protective coatings, manufacture and installation need to be understood to get the best results for particular industries and applications. The company says these changes are particularly important to the resources, energy and ‘green’ environmental processing industries.
Fresco compression loadcells
06 September, 2010 | Supplied by: Fresco NZ Ltd
The low-profile compression loadcell mounting kit is designed for silo and tank weighing applications. With in-built overturning restraints suitable for zone 4 earthquake regions, no other load restraint devices are required. Kit heights as low as 125 mm ensure they can be easily retrofitted to existing silos, removing the reliance on level sensors and providing a higher degree of accuracy for stock control and delivery validation.
Enmin’s EVFLT electromagnetic vibratory feeder drives
06 September, 2010 | Supplied by: Enmin Pty Ltd
Enmin’s EVFLT electromagnetic vibratory feeder drives are fifth-generation units that offer the same degree of reliability as previous versions but with improved components. The overall dimensions and footprint remain the same, therefore the latest drives are interchangeable with the earlier models but offer better overall performance.
Converging Solutions Pack Integrator and Collator systems
06 September, 2010 | Supplied by: Inspection Systems Pty Ltd
Inspections Systems has secured the distributorship for Converging Solutions in Australia and New Zealand. Based in the UK, Converging Solutions is a supplier of converging and pack handling equipment in the packaging industry.
TEA Transmission linear slide system
03 September, 2010 | Supplied by: TEA Transmissions Pty Ltd
TEA Transmission’s slide system is claimed to be suitable for temperatures up to 550°C. The system consists of a high-strength aluminium carriage body that retains high-performance sliding elements which move on flat, anodised aluminium rails (steel or stainless steel are optional choice of materials). The entire surface of the sliding element lies exactly on the rail - dirt or dust particles are removed continually by the ‘snow-plough’ effect.
TechnoWrapp A800 and A800 4E pallet stretch wrappers
03 September, 2010 | Supplied by: HBM Packaging Technologies
Technowrapp’s A800 and A800 4E high-speed pallet stretch wrappers are claimed to use as little as 96 g of film per pallet.
Schütz DSL multi-layer IBCs
03 September, 2010 | Supplied by: Schuetz DSL Australia
Schütz DSL has installed a multi-layer blow moulding machine specifically designed to produce a co-extruded 3- and 6-layer HDPE (high density polyethylene) inner bottle, in its Victorian plant.
Hi-Cline scalping machine
03 September, 2010 | Supplied by: iBulk Solutions Pty Ltd
The Hi-Cline machine is claimed to efficiently scalp product for lump removal at high capacities.
