Materials handling & storage and supply chain

FlexLink X65 conveyor

19 March, 2013 | Supplied by: FlexCAM

FlexLink’s X65 conveyor has standardised functions for the handling of products up to 3 kg. It offers a lower noise level and a lower total cost of ownership.


Raising the roof on wine distribution

15 March, 2013 | Supplied by: Toyota Material Handling Australia Pty Ltd

Toyota Material Handling Australia helped engineer a solution to find the most efficient packing and picking methods for Rathbone Wine Group’s inner-Melbourne distribution centre.


Flexicon Tip-Tite Sanitary Box Tipper

11 March, 2013 | Supplied by: Flexicon Corporation (Australia) Pty Limited

The Tip-Tite Sanitary Box Tipper from Flexicon forms a dust-tight seal between the container and the equipment, tips the container and discharges bulk material at controlled rates.


Loscam approved for chilled and frozen operations

08 March, 2013

Woolworths subsidiary Progressive Enterprises has approved acceptance of Loscam pallets for its chilled and frozen business.


Dematic Multishuttle 2 high-volume order fulfilment system

08 March, 2013 | Supplied by: Dematic Pty Ltd

Dematic’s second-generation Multishuttle 2 incorporates advanced engineering, lightweight aluminium construction and a load extractor for faster operating speeds, higher payload capacity and multideep storage capability.


Mettler Toledo colorWeight checkweighing coloured display

08 March, 2013 | Supplied by: Mettler-Toledo Ltd

ICS5 compact scales from Mettler Toledo with a colorWeight coloured display assist operators speed up the checkweighing process and avoid errors.


Mettler Toledo handbook on weigh module integration

22 February, 2013 | Supplied by: Mettler-Toledo Ltd

Mettler Toledo has issued a handbook providing advice on the design and application of load cells and weigh modules for tanks, silos, vessels, hoppers and conveyors.


Optimum lifts safety and productivity for warehousing company

21 February, 2013 | Supplied by: Optimum Handling Solutions

A national warehousing company sought a solution to a high-risk unloading procedure, where operators had to bend below waist level and above elbow height in order to unpack pallets for sorting.


Crate results for citrus growers

20 February, 2013 | Supplied by: CHEP Australia

Fruit growers are a pragmatic bunch, so when citrus grower Chris Deveney says that his first choice for shipping oranges and mandarins is a CHEP crate, there has to be a practical reason why.


Technosoft iPOS360x SX multi-axis motion system

20 February, 2013

iPOS360x SX allows users to plug in up to four iPOS3602 VX or iPOS3604 VX intelligent drives and provides all the necessary connectors (motor, encoder feedback and I/O signal) for each drive.


BWAY Tri-Seal Gasketless Openhead Plastic Pail Cover

18 February, 2013 | Supplied by: BWAY Corporation

The Tri-Seal Gasketless Openhead Plastic Pail Cover from BWAY produces a watertight/airtight seal without special capping equipment, eliminating concerns about incomplete seating, gasket twisting and rebounding, etc.


Dematic RapidStore UL automated storage and retrieval systems

18 February, 2013 | Supplied by: Dematic Pty Ltd

Compared to conventional storage systems and materials handling equipment, RapidStore UL is claimed to require a smaller building footprint to house the same number of pallets or unit loads.


Mettler Toledo ICS685 scales for compliant tracking and tracing

15 February, 2013 | Supplied by: Mettler-Toledo Ltd

Mettler Toledo’s robust ICS685 scales provide predefined templates for printing that can be used right away, but also let operators define new templates that better meet their processing needs.


Beverage manufacturer’s innovative approach pays off

12 February, 2013 | Supplied by: CHEP Australia

For anyone who grew up in Melbourne, Slades’ home-delivered soft drinks are an institution. The Tan family took over Slades in 2001, turning a business in decline into a thriving enterprise with a progressive and innovative outlook.


Flexicon Sanitary Tilt-Down Flexible Screw Conveyor

04 February, 2013 | Supplied by: Flexicon Corporation (Australia) Pty Limited

With the hopper, support boom and conveyor assembly tilted down, Flexicon’s conveyor fits through standard doorways and orients the conveyor tube horizontally.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd