Directory Search



Technical Projects

Technical Projects has been a reliable supplier of nozzles to all types of industries since 1982. We specialise in general purpose nozzles, air atomising nozzles, filters, wash-down guns, tank cleaning heads and hose reels. For the solution to your supply or selection problem contact the dedicated team at Technical Projects.


Website: http://www.tecpro.com.au
Email: sales@tecpro.com.au
Phone: 02 9634 3370
Fax: 02 9634 6418
Address:
4/44 Carrington Road , Castle Hill NSW 2154 (Directions)

Products

ILMAP water filter nozzles

ILMAP water filter nozzles are WRAS certified to help ensure consumer health and safety.

Tecpro Level Wind Hose Guide

The Tecpro Level Wind Hose Guide is designed to minimise bunches or tangles in hoses.

Tecpro Australia washdown guns

Tecpro Australia has a range of washdown guns that are suitable for high- or low-pressure applications.

ZPN Mini Pipe Clamps

ZPN Mini Pipe Clamps enable any spray pipe to be assembled onsite without the need for special tools or welding equipment.

Tecpro Australia Insulated Panel Mounting Plates

Tecpro Australia's Insulated Panel Mounting Plates have been designed to support hose reels which are mounted to insulated coolroom panels.

AKIMist 'E' Dry Fog Humidifier Kit

The AKIMist 'E' Dry Fog Humidifier Kit uses technology to produce an ultrafine 'non-wetting' dry fog with a mean droplet size of 7.5 microns.

Ramex 7802 foamer

The Ramex 7802 foamer has been developed to produce better foam and deliver higher sanitation performance.

Tecpro Australia lightweight foam spray gun

The lightweight foam spray gun from Tecpro Australia eliminates the need for compressed air. Using a foaming head that's shaped like a duck's bill, the product aspirates the antiseptic and water mix within the unit.

Tecpro Humi Food System

The Tecpro Humi Food System is a flexible, cost-effective solution for a range of retailers. It is designed to optimise shelf life for selling fresh foods and produce.

Tecpro CAY Cluster Nozzle for dust suppression

Tecpro's CAY Cluster Nozzles for dust suppression have seven orifices in the one unit so they produce a finer spray than conventional full-cone nozzles with only one orifice.

Tecpro Australia Air/Water Cleaning Gun

Tecpro Australia's Air/Water Cleaning Gun combines low pressure water with compressed air, enabling efficient cleaning when water pressure is low or clean water supplies are limited.

Tecpro conveyor cleaning products and services

Tecpro Australia offers a wide range of spray nozzles suitable for every situation, plus technical consultants and engineers to provide advice and custom-designed spraying systems.

Tecpro Australia vehicle disinfection system

Tecpro Australia offers cost-effective vehicle disinfection systems that are easy to install at the entrance and exit of a plant or farm.

Tecpro Spring Retractable Hose Reels with Safety Brake

Tecpro Australia has released a Safety Brake system to slow down the speed of hose reel retraction. The safety brake uses a compact, adjustable pawl locking mechanism that attaches to the Spring Retractable Hose Reels.

ILMAP filter nozzles

A large and flexible range of ILMAP filter nozzles is available to meet any specification.

Tecpro stainless steel flat fan blowing nozzles

Tecpro Australia has released a Flat Fan Blowing Nozzle in 316L stainless steel that is suitable for applications requiring strong impact airflows.

RACA International spray-drying atomiser nozzles

Tecpro Australia has available a range of high-quality spray-drying atomiser nozzles from RACA International, compatible for use with most dryers.

Tecpro red, blue and white heavy-duty hose nozzles

Tecpro Australia has released its range of colour-coded hose nozzles. The heavy-duty hose nozzles will fit ½″, ¾″ and 1″ hoses and are suitable for any high-volume washdown application.

Breconcherry Turbodisc spray head range

The Breconcherry Turbodisc spray heads, available from Tecpro Australia, are suitable for small and medium process vessels, reactors, driers, granulators, storage tanks, tablet-coating machines and IBCs.

Tecpro Australia 316 L Stainless Steel Hot Water Hose Nozzle

Tecpro Australia's 316 L Stainless Steel Hot Water Hose Nozzle is built with a replaceable, white, EPDM rubber grip.

Tecpro Australia Ultrasonic Atomiser Nozzles for dust suppression

For industries with moisture-sensitive dust particles or for compact locations, Ultrasonic Atomiser Nozzles use a process in which tiny water jets are injected into a high-speed airflow before passing through a field of soundwaves.

RACA International spray-drying atomising nozzles

Tecpro Australia has available RACA International spray-drying atomising nozzles.

Tecpro Australia RB35 lightweight washdown gun

Tecpro Australia has released the RB35 lightweight ergonomic washdown gun.

Tecpro Australia RB65 washdown gun with ½″ BSP outlet

Tecpro Australia's RB65 washdown gun can be fitted with stainless steel lances of varying lengths enabling spray cleaning of hard-to-reach areas.

Ramex stainless steel retractable hose reels

Tecpro Australia has available the Ramex stainless steel retractable hose reels.

Tecpro ATEX certified fog maker

Tecpro has introduced an ATEX certified version of its fog makers that suppresses dust in areas in danger of explosion.

Breconcherry Tornado high-flow jetting tank washer

Available from Tecpro Australia, the Breconcherry Tornado is a high-flow jetting tank washer designed to provide high-impact jets for difficult-to-clean products such as yeast, glue and resin.

Tecpro dust suppression solutions

Tecpro Australia offers advice and guidance on dust suppression solutions for a range of industries. Its range of solutions includes a variety of nozzles and fog makers.

Tecpro Chemitorus Teflon tankwasher

The Chemitorus tankwasher from Tecpro is a low-flow, low-pressure tankwasher designed for use in small vessels, pipes and other difficult applications that previously required manual cleaning.

Dynafluid 2000 steam and water mixing valve

The Dynafluid 2000 steam and water mixing valve combines steam with cold water to deliver a constant flow of hot water without the need to install water heating and pumping systems.

Typhoon Jetting Tank Washer

Available from Tecpro Australia, the Typhoon Jetting Tank Washer with rotating cleaning head is suitable for large vessels, including food and beverage storage tanks, transport containers and chemical reactors.

Breconcherry Fury 602 jetting tank washer

Available from Tecpro Australia, the Breconcherry Fury 602 is a high-power, low-flow jetting tank washer, designed for use in large process vessels, storage tanks, transport containers and chemical reactors.

Tecpro Sanitor Tank Cleaner

Designed to comply with sanitation and hygiene standards, the Sanitor Tank Cleaner from Tecpro Australia is constructed completely from 100% AISI 316 stainless steel.

PA Italia M28E high-pressure wine barrel cleaner

The PA Italia M28E high-pressure cleaner offers effective cleaning of wine barrels with the added benefit of automatic siphoning and a specially designed holder to secure the unit in place.

Breconcherry Turbo SSB 125 rotating spray head

The Breconcherry Turbo SSB 125 rotating spray head has been designed to clean medium to large vessels and manufacturing equipment.

PNR range of nozzles ‘turn-off’ nozzles for spray heads

The PNR range of nozzles can be shut off individually to suit different requirements.

ILMAP Filter Nozzle Type P

The Filter Nozzle Type P, designed and manufactured by ILMAP is suitable for the refurbishment of water treatment systems and is available in a range of specifications to suit many different installations. The nozzle can be custom made or users can choose from slot widths ranging from 0.25 to 3 mm, and a wide variety of standard thread and stem sizes.

Idrotech high-pressure dust suppression nozzles

The Idrotech range of high-pressure dust suppression nozzles can be used to suppress dust, control odours, humidify and provide evaporative cooling.

Breconcherry Turbo SSB rotating tank cleaning head

The design of the Breconcherry Turbo SSB rotating tank cleaning head eliminates ball bearings and maintains a consistent jet peripheral velocity for improved cleaning efficiency, hygiene and durability.

Typhoon jetting tank washer

The Typhoon rotating cleaning head is suitable for washing large vessels, including food and beverage storage tanks, transport containers and chemical reactors. The Typhoon produces four high-powered jets that give complete coverage in a quick seven-minute wash cycle. Even at high flow rates, the geared movement maintains an optimum jet peripheral velocity that increases impingement and chemical dwell times to maximise cleaning effectiveness. The cleaning head’s efficient wash cycle reduces downtime and saves on water and effluent costs.

Breconcherry Tempest tank washer

The Breconcherry Tempest is a high-flow jetting tank washer specially designed with longer nozzles to maximise power and efficiency.

Ramex retractable, manual rewind and motor rewind hose reels

The Ramex range of retractable, manual rewind and motor rewind hose reels ensures high performance, durability and hygiene for any work site.

Tecpro Fury IBC cleaner

The Fury IBC cleaner is the first tank washer designed specifically for use with IBCs. It produces high-power, low-flow jets that can remove most industrial residues and contamination. It is lightweight and compact enough for easy insertion into any IBC and its wash cycle makes it easy to effectively clean several containers quickly.

Sanitor tank washer

The Sanitor tank washer combines the functionality of a slow constant rotation across a wide pressure band, with economical flow rates and strong cleaning jets.

Wash down gun

Instant visual identification of high-temperature water outlets is now possible due to the brightly coloured, red version of the Ergonomic Wash Down Gun.

Tank cleaning spray ball

The Mini Spray Ball provides cost-effective tank cleaning performance in a compact, zero-maintenance design

High-temperature washdown gun

Instant visual identification of high-temperature water outlets is now possible when using the latest, brightly coloured, red version of the Ergonomic Washdown Gun.

Tank cleaning head

The Breconcherry Fury 404 Tank Cleaning Head is suitable for process vessels, food and beverage storage tanks, transport containers and chemical reactors. Its compact design and piston-operated mechanism produces high-impact, long-range jets for effective surface coverage and high impingement.

Categories

Brands

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd