Sensorex CLD500 Chlorine Dioxide Sensors

Wednesday, 05 December, 2012 | Supplied by: Envirosensors Pty Ltd


Sensorex’s CLD500 Chlorine Dioxide Sensors use advanced amperometric measurement technology to provide highly accurate monitoring of chlorine dioxide in disinfection applications.

With two models covering the 0-2 ppm and 0-10 ppm full scale ranges, the sensors can be used in new installations or as a field replacement for existing sensors in chlorine dioxide generators, pools and other water-treatment systems.

The sensors’ advanced sensing membrane keeps cross sensitivity interference from free chlorine to a minimum. The sensor offers improved sensor stability over the entire operating temperature range.

An integral 2-wire loop-powered transmitter with 4-20 mA output delivers readings to process control systems such as a PLC or DCS. The CLD502 covers the 0-2 ppm range, while the CLD510 model covers the 0-10ppm. A large electrolyte reservoir with an easily replaced membrane cap and solution may reduce maintenance and improve sensor life.

Online: www.envirosensors.com.au
Phone: 02 9904 3316
Related Products

Steinecker Botec F1 and ILTIS process control systems

The Steinecker Botec F1 and ILTIS process control systems are designed to enable companies to...

Evoguard H1CP series hygienic pumps

Evoguard is introducing a new generation of mash and wort pumps designed for applications with...

EXAIR EFC Electronic Flow Control for compressed air

EXAIR's EFC Electronic Flow Control has been redesigned to make it easier to minimise...


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd