HabasitLINK M5065 HyCLEAN plastic modular belt

Monday, 03 November, 2014 | Supplied by: Habasit Australia and New Zealand



Habasit HyCLEAN plastic modular belts have been developed to improve hygiene conditions and cleaning procedures in food processing areas. The package includes a new sprocket and a 50.8 mm flat top module, with a hygienic design. The system also includes a CIP (cleaning in place) system that enables faster and more reliable cleaning cycles, substantially less water use and lower labour costs.

The products feature hygienic design, which complies with EHEDG hygienic design criteria, 100% hinge accessibility, 85% rod access, thorough cleaning of the belt and sprockets and good performance with low water-pressure.

The HabasitLINK M5065 Flat Top 2″ HyCLEAN comes in standard belt widths in increments of 3″ (76.2 mm). Non-standard widths are offered in increments of 1.5″ (38.1 mm). The smallest possible width is 6.0″ (152.4 mm).

The nominal tensile strength is valid for 23°C (73°F). The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.

Features include: 0% open area; solid plate; extra wide dynamic open hinge (6″ link pitch); smart fit rod retention; food approved materials available.

Online: www.habasit.com.au
Phone: 1300 945 455
Related Products

Innopro BoxFlash compact flash pasteuriser

Now compatible with the glass, can and PET container segments, its compact design means users...

Dwyer Instruments Series EDA Electronic Pressure Controller

The Series EDA Electronic Pressure Controller can replace a separate gauge, two switches and a...

CDP301 hydrocarbon and water dewpoint tester

The product uses the chilled mirror technique for accurate measurements of both hydrocarbon and...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd