EXAIR No Drip Atomizing Spray Nozzles

Click2Contact

The EXAIR No Drip Atomizing Spray Nozzles atomise fluids in a range of spray patterns for a variety of uses, including washing, rinsing, coating, cooling, quenching, wetting (moistening), humidification and dust control. They combine liquid and compressed air to create an adjustable mist of atomised liquid and have the added benefit of positively stopping liquid flow when the compressed air is shut off.

When spraying any type of liquid, post spray liquid flow can ruin product finishes on painted or coated surfaces. Excess liquid flow also wastes precious resources such as expensive coatings, chemicals or water. When the compressed air supply is shut off, EXAIR’s No Drip Atomizing Spray Nozzles positively seal off the flow of liquid eliminating the possibility of drips.

All models use stainless steel construction for durability and corrosion resistance and are CE compliant. They are available in 1/8″, ¼″ and ½″ sizes in 3 basic families:

No Drip Internal Mix Atomizing Nozzles mix the liquid and air inside the air cap and produce fine atomisation; for liquids with a viscosity up to 300 cP; both air and liquid sides are pressure fed.

No Drip External Mix Atomizing Nozzles feature high flow rates and allow the air and liquid flows to be adjusted independently; best where precise liquid flow is needed; for liquids with a viscosity above 300 cP; both air and liquid sides are pressure fed.

No Drip Siphon Fed Atomizing Nozzles require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height up to 36″ (914 mm); for liquids with a viscosity up to 200 cP.

For more information: https://www.caasafety.com.au/product-category/atomizing-spary-nozzles/.