Spiral conveyor belt

Tuesday, 01 September, 2009 | Supplied by: Locker Group


Ashworth Bros has introduced a 1½″ pitch Omni-Pro link to extend the line of spiral/turn-curve conveyor belts. The Omni-Pro 150 retains the same design features that allow the belt to minimise cage bar wear, maintenance costs and downtime in demanding high-tension spiral applications.

Omni-Pro 150 is claimed to withstand spiral/turn-curve tensions of 136 kg for 100,000 cycles.

The increased strength of the device comes from the 360° buttonless weld technology utilising a zero tension design which allows a higher load bearing capacity. The 360° buttonless weld is free from surface imperfections and crevices which improves hygienic characteristics by eliminating the possibility of bacteria entrapments.

Omni-Pro’s link design includes a protrusion leg which prevents welds from contacting spiral cage bars and permits the belt to run more smoothly with less system wear.

Each link is formed with a coining process to prevent break-in wear, reducing belt elongation and increasing belt life. Turn ratios range from 1.6 to 2.5 and belt widths are available in even widths from 24 to 60″.

Online: www.locker.com.au
Phone: 03 8791 1000
Related Products

Flexicon Twin Tilt-Down flexible screw conveyor on mobile base built to 3-A standard

New from Flexicon is a Twin Tilt-Down Flexible Screw Conveyor system with dual hoppers on a...

NORD LogiDrive Advanced and LogiDrive Basic drive solutions

The NORD LogiDrive  solution is an energy-efficient, service-friendly and standardised...

Mixquip Series 620-3 High Shear Powder Liquid Mixer

Incorporate powders into liquids faster, more efficiently and cost-effectively with Mixquip's...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd