ifm efector pressure sensor with IO-Link

Friday, 01 June, 2012 | Supplied by: ifm efector pty ltd



ifm efector’s robust pressure sensor now communicates all data flexibly via switching outputs or IO-Link 1.1.

Process data and diagnostic information are transmitted easily using a standard cable. Also, parameter setting of this PN7-type pressure sensor also uses the IO-Link communication technology. An IO-Link master saves the parameters of the connected sensor and transmits them when the sensor is replaced by a device of the same type. This eliminates the need for a new parameter setting. If the IO-Link function is not used, then the pressure sensor operates as before, with two switching outputs (SIO mode) or a switching output and a diagnostic output.

Additionally, the sensor has high switch point accuracy and switching frequency, as well as being robust. The overload-protected ceramic measuring cell withstands more than 100 million switching cycles, the company claims.

Versions with pressure ranges between -1 and 600 bar are available.

Online: www.ifm.com/au
Phone: 03 8561 0500
Related Products

Koch Membrane Systems Sani-Pro spiral elements

The Sani-Pro spiral elements range is designed to improve energy efficiency, increase...

Counter-Swirl Series 6000 static mixers

The Counter Swirl Series 6000 static mixer provides solutions for a range of mixing problems. The...

Krones VarioFlash B flash pasteuriser

The VarioFlash B flash pasteuriser is suitable for large breweries and craft breweries, enabling...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd