EXAIR Atomizing Spray Nozzles
EXAIR’s Atomizing Spray Nozzles atomise fluids in a range of spray patterns for a variety of uses, including washing, rinsing, coating, cooling, quenching, wetting (moistening), humidification and dust control. They combine liquid and compressed air to create a mist of atomised liquid that can be easily adjusted to meet the needs of the user’s application.
All models are stainless steel construction for durability and corrosion resistance and are available in ⅛″, ¼″ and ½″ sizes in 3 basic families:
Internal Mix Atomizing Nozzles mix the liquid and air inside the air cap and produce the finest atomisation. They can be used on liquids with a viscosity up to 300 cP. Both air and liquid sides are pressure fed.
External Mix Atomizing Nozzles have high flow rates and allow the air and liquid flows to be adjusted independently. These nozzles are best where precise liquid flow is needed. They can be used on liquids with a viscosity above 300 cP. Both air and liquid sides are pressure fed.
Siphon Fed Atomizing Nozzles require no liquid pressure and can be used with gravity fed liquids or liquids from a siphon height as much as 91 cm. The nozzles can be used on liquids with a viscosity up to 200 cP.
The maximum temperature rating is 204°C for EXAIR’s atomising spray nozzles and all models are CE compliant.
Phone: 08 8983 3999
The TruWeight system by Baker Perkins is designed to reduce the variations in cookie piece...
Installation of optek sensors at the inlet and outlet of a centrifuge can improve separation...
Alfa Laval's Brew 20 beer centrifuge is designed for microbreweries and brewpubs, with a...