Flexicon combination bulk bag and manual dump weigh batch system

Tuesday, 04 May, 2010 | Supplied by: Flexicon Corporation (Australia) Pty Limited



A combination bulk bag and manual dump batching system weighs bulk materials that are discharged from bulk bags and/or manually dumped from sacks, boxes and other containers and empties the batch into mobile storage bins.

The hygienic system consists of a bulk bag unloading frame, two hoppers and two flexible screw conveyors that feed a central gain-in-weight hopper under automated control.

A programmable controller with manual start button activates either of the flexible screw conveyors, to load the first ingredient into the central weigh hopper at maximum feed rate. Load cells supporting the hopper transmit weight gain information to the controller, which steps-down the feed rate to trickle prior to reaching the target weight. In the same manner, the controller starts and stops the second conveyor to load the second ingredient into the weigh hopper and then activates the hopper’s slide gate valve to discharge the batch into mobile storage bins.

The unloader features a Spout-Lock clamp ring that forms a high-integrity seal between the clean side of the bag spout and the clean side of the equipment.

To promote total evacuation of material, a Tele-Tube telescoping tube maintains constant downward pressure on the clamp ring and bag spout, elongating the bag as it empties, while Flow-Flexer bag activators raise and lower bottom edges of the bag into a steep ‘V’ shape, directing material into the bag outlet spout.

Immediately above the clamp ring is a Power-Cincher flow control valve employing a series of curved, articulated rods that cinch the bag spout concentrically, allowing dust-free retying and removal of partially empty bags.

A removable bag-lifting frame with bag strap hooks and fork tubes allows loading of the lifting frame with bag intact, onto a cradle at the top of the unloader frame posts.

The flexible screw conveyors handle a variety of free- and non-free-flowing bulk materials including products that pack, cake, smear or easily degrade, with no separation of blended products.

Material contact surfaces of the system are stainless steel, finished to hygienic standards, with the exception of the polymer conveyor tubes, which are removable for rapid, thorough washdown.

The floor hopper is available with a containment hood including integral dust collection.

Online: www.flexicon.com.au
Phone: 07 3879 4180
Related Products

A Plus Plastics AP36 36-litre crate

The AP36 crate by A Plus Plastics is a lightweight, vented packing crate, suitable for packing...

Narva safety light range for forklifts

The Narva 10–60, 9–80 and 9–64 V safety lights can increase situational...

Firestone 50-P-10 Airomatic Polyactuators pneumatic actuators

The Firestone 50-P-10 Airomatic Polyactuators pneumatic actuator is the smallest in the range and...


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd