The ToolReg inline air regulator is designed to ensure that only the required pressure is used for each individual pneumatic tool.
The HoseGuard air safety fuses reduce the risk of whiplash from thrashing hoses, protecting compressed air hoses and pipes.
The EXAIR standard ion air knife reduces static electricity, saving compressed air and improving production speeds.
Exair's Air Amplifiers can be used to cool hot parts, dry wet surfaces, distribute heat in moulds or ovens, ventilate confined areas and more.
The EXAIR No Drip Atomizing Spray Nozzles atomise fluids in a range of spray patterns for a variety of uses, including washing, rinsing and dust control.
EXAIR's 1/8 NPT small internal mix spray nozzles atomise fluids up to 106 L/h.
EXAIR's Atomizing Spray Nozzles atomise fluids in a range of spray patterns for a variety of uses, including washing, rinsing, coating, cooling, quenching, wetting (moistening), humidification and dust control.
When static is a problem on moving webs, sheet stock, three-dimensional parts, extrusions or packaging, EXAIR Gen4 Static Eliminators (also called ionisers) can eliminate the charge.
EXAIR's Soft Grip Back Blow Safety Air Gun uses a small back blow nozzle to deliver a blast of air to effectively blow debris and liquids from inside small pipe or hose diameters, channels, bores, holes, internal threads and other internal part features.
EXAIR's Gen4 Super Ion Air Wipe provides a uniform, 360° ionised airstream that clamps around a continuously moving part to eliminate static electricity and contaminants.
EXAIR's 1/8 NPT No Drip External Mix Atomizing Spray Nozzles mix liquid and air outside the nozzle and allow the air and liquid flows to be adjusted independently.
EXAIR's Super Air Nozzles offer a highly efficient way to blowoff, cool, dry and clean. Many designs are available to suit a range of applications.
Exair's 1/8 NPT Small External Mix Spray Nozzles atomise fluids at up to 94.6 L/h.
EXAIR's 303SS air jets provide efficient blowoff and cleaning within corrosive, high-temperature or washdown environments.
Designed to fit within users' current sanitary flange piping system and convert it into a conveyor for waste, parts and bulk materials, EXAIR's Sanitary Flange Line Vac can be used to convey materials in systems that require frequent or mandatory cleaning.
EXAIR has a complete line of low-cost Cabinet Coolers that mount in minutes through an ordinary electrical knockout and have no moving parts to wear out.
The EXAIR small 316 stainless steel cabinet cooler systems with electronic temperature control keep electrical enclosures cool with -7°C air, while maintaining the NEMA 4X rating of the enclosure and resisting the heat that could adversely affect the internal components.
EXAIR's High Lift Chip Trapper offers a fast, easy way to clean coolant sumps, waste oil pits or wells. The product removes the solids such as chips, swarf and shavings out of used coolants and other liquids with up to 4.5 m of lift or 6 m of horizontal vacuum.
The EXAIR Model 1004SS M4 back blow air nozzle has been designed to deliver the smallest, most effective airflow for blowing debris and liquids from small pipe or hose inside diameters, channel, bores, holes, internal threads and other internal part features.
Exair's ½″ Siphon Fed Atomizing Spray Nozzle atomises a variety of fluids in a round spray pattern where no liquid pressure is available and heavy application of liquid is needed.
Exair's Ion Air Cannon eliminates static electricity and cleans at distances up to 4.6 m, with no moving parts. It is suitable for benchtops, machine mounting and hard-to-reach spaces that require a concentrated flow of static-eliminating ions.
Exair has added smaller and larger sizes to the air-operated 316 Stainless Steel Threaded Line Vac conveyor product line which convert ordinary pipe into an inline conveying system.
Exair's ¼″ No Drip Internal Mix Deflected Flat Fan Atomizing Spray Nozzle atomises fluid and sprays at a right angle to the nozzle orientation.
Exair's small 316 Stainless Steel Cabinet Cooler Systems keep electrical enclosures cool with -7°C air while resisting heat and corrosion that could adversely affect the internal components.
Exair's Stainless Steel Plumbing Kits simplify installation of the Stainless Steel Super Air Knife by including all of the appropriate fittings and tube for hooking up to a compressed air supply.
Exair's stainless steel external mix spray nozzles can be used to coat, cool, treat and paint a variety of products.
EXAIR's Model 1008SS 1″ Back Blow Air Nozzle has been designed to blow debris and liquids from pipe or hose inside diameters, axle housings, bores, holes, internal threads and other internal part features.
EXAIR's 1/4 NPT Internal Mix Deflected Flat Fan Atomising Spray Nozzle atomises fluid and sprays at a right angle to the nozzle orientation.
EXAIR's 1/2 NPT Internal Mix Atomising Spray Nozzles atomise fluids in a range of spray patterns and liquid volumes for a variety of uses.
EXAIR's Back Blow Air Nozzle blows debris and liquids from pipe or hose inside diameters, channels, bores, holes, internal threads and other internal part features.
EXAIR's aluminium 3/8″ NPT and 1/2″ NPT Threaded Line Vac air-operated conveyors convert ordinary pipe into a powerful conveying system for parts, scrap, trim and other bulk materials.
Protect-Air HoseGuard safety fuses offer protection to pneumatic systems in the event of a broken compressed air hose or pipe.
Exair has announced that its Heavy Duty Dry Vacs have met the safety, health and environmental standards of the European Union that are required to attain the CE mark.
EXAIR's siphon-fed atomising spray nozzles are designed for conditions where no post-spray drip is permissible, as they positively stop liquid flow when compressed air is shut off.
EXAIR's 1″ High Power Stainless Steel Flat Super Air Nozzle produces a flat 25 mm wide airstream with a blowing force of 462 g when mounted 305 mm from the target.
Compressed Air Australia has available the EXAIR PEEK Pico Super Air Nozzle. It delivers one of the smallest, most precise blowoffs available with an efficient airflow.
Exair's Digital Flowmeters provide a way to monitor compressed air consumption and waste. With the addition of six extra sizes, the company makes it easier to measure consumption and identify trends at all of the critical areas or individual legs of a compressed air system.
Exair Long Super Air Knives include a longer maximum length of 2743 mm and the company is manufacturing all knives 1524 mm and longer in one-piece construction.
Exair's Long Ionizing Bars reportedly eliminate static electricity on paper, film and plastics that are up to 2438 mm wide. Static electricity can attract dust and foreign materials, spoil product appearance and lead to jamming or tearing.
Exair's 1″ Stainless Steel Flat Super Air Nozzle produces a flat 25 mm-wide airstream with a blowing force of 278 g when mounted 305 mm from the target.
The Exair PEEK Atto Super Air Nozzle has been engineered to deliver precise blowoff with an efficient, high-volume, high-velocity airflow. It is suitable for blowoff, cooling and drying applications in general industrial or corrosive environments.
Line Vac Conveyors convert hose, tube or pipe into a powerful inline conveying system and handle materials up to 482°C. They eject a small amount of compressed air to produce a vacuum on one end.
Exair’s External Mix Spray Nozzles atomise fluids in a range of spray patterns for a variety of uses. They are suitable for applications where a high volume of liquid is needed.
Exair’s Heavy Duty HEPA Vac attaches to a 205 L open-top drum to turn it into a powerful HEPA quality industrial vacuum cleaner.
The compact Super Air Knife provides a powerful curtain of airflow while reducing compressed air usage and noise. The Super Air Knife offers an efficient way to clean, dry or cool parts, webs or conveyors.
Exair’s 1″ Flat Super Air Nozzle produces a flat 1″ (25 mm) wide airstream with a strong blowing force of 278 grams when mounted 12″ (305 mm) from the target.
Exair’s 54″ Super Ion Air Knife neutralises static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and three-dimensional shapes.
Exair’s updated Blowoff Guide helps users select the appropriate air nozzle and safety air gun for the application. The 24-page guide contains colour photos, comparison guides, performance data and OSHA safety information.
With Exair’s Siphon Fed Atomizing Nozzles, users can coat, cool, treat and paint a variety of products using compressed air and liquids with a viscosity of up to 200 cP.
Exair has released the 1180SS Atto Super air nozzle, designed for precise blowoff. The nozzle is suitable for blowoff, cooling and drying applications in general industrial, high-temperature, food, pharmaceutical, semiconductor and corrosive environments.
Exair’s Premium Chip Vac system is used to clean chips or other dry materials from fixtures, floors and work surfaces of machining centres, lathes, saw mills and other industrial equipment.
Exair’s Deluxe Super Ion Air Knives are available in kits from Compressed Air Australia.
Exair’s Vortex Tubes provide a low-cost, reliable, maintenance-free solution to a variety of industrial spot cooling problems. The Vortex Tubes meet the rigorous European Union safety, health and environmental standards and have attained a CE mark.
Exair’s Reversible Drum Vac is a powerful liquid vacuum and is able to vacuum coolant, hydraulic oils, spills, sludge, tramp oil and wastewater. With the turn of a knob, the same stainless steel pump quickly empties the drum. Coolant sumps can be easily refilled, floor spills vacuumed or contaminated liquids transferred to filtration tanks in minutes.
Exair’s atomising spray nozzles are internal mix nozzles that atomise fluids in a range of spray patterns for a variety of uses. They combine liquid and compressed air to create a mist of atomised liquid that can be easily adjusted to meet the needs of an application.
Exair’s Long Super Ion Air Knives neutralise static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and 3D shapes up to 2438 mm across. The wide laminar airstream full of static eliminating ions is effective at high speeds and provides good cleaning up to 6.1 m away. Poor print quality, dust attraction, tearing, jamming and related equipment downtime can be eliminated.
Exair’s Long Super Air Knives produce a laminar sheet of airflow to blowoff, dry or cool wide surfaces up to 2438 mm. The compact, energy-efficient design minimises compressed air use by entraining 40 parts room air to one part compressed air, suitable for use on wide parts, webs and conveyors.
Exair’s mini reversible drum vac system is a liquid vacuum, capable of vacuuming 20 L in less than 10 s. With the turn of a knob, the pump empties the drum, eliminating the need for dumping.
Ex-air’s 48" Super Ion air knife neutralises static electricity while blowing away dust and particulates from printed surfaces, paper, plastics and 3D shapes.
Exair’s 1372 mm Super Air Knife produces a laminar sheet of airflow to blowoff, dry or cool wide surfaces.