The Huco Dynatork air motor is based on a free-floating piston design that is capable of precise position control. Its maximum torque is transmitted on start-up and this can be adjusted to fine limits by standard airflow valves.
The motor is suitable for stop/start load speed applications under load.
Unlike its vane counterpart, the Huco Dynatork air motor is also easier to seal. It is therefore far more cost efficient as most of the energy stored up in the compressed air is converted into motion.
The clean motor is available with non-lube air supply and in a corrosion-resistant or acetyl housing. The clean, non-lube running ensures hygienic production.
On the original design, pneumatic tubing was external to the housing. This made it vulnerable, sensitive to temperature extremes and difficult to clean. The pneumatic porting on the latest models is now an internal feature making them far more robust. Fasteners are also recessed to reduce potential bug traps.
The Huco Dynatork motors can run from 0-220 rpm for 24 hours a day in a cycle that goes from stall to start in the order of 60 times/min. The motors are suitable for washdown.
Phone: 02 9894 0133
Hygiena foodproof Salmonella plus Cronobacter Detection LyoKit
Hygiena has launched its foodproof Salmonella plus Cronobacter Detection...
GEA kytero 10 single-use disk stack centrifuge
The GEA kytero 10 is claimed to be the world's smallest single-use disk stack centrifuge.
Key Technology and PPM Technologies automated nut processing line
Key Technology and PPM Technologies have introduced a fully integrated nut processing line.
