Optek OPT0007-ACF60-35 Conductivity Sensor

Monday, 24 June, 2024 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Optek OPT0007-ACF60-35 Conductivity Sensor

Knowing the conductivity of liquid samples is a key parameter to control product quality throughout the production process. The optek ACF60 conductivity sensor is designed to fulfil technical requirements of international regulations for measurements ensuring quality and consistency.

The conductivity sensor features a six-electrode, four-pole design. The arrangement of the four current electrodes around the two potential electrodes results in good measurement. The design also provides reduced sensitivity to sensor fouling and polarisation. The combination of optek C800 or C8000 universal converter and ACF60 conductivity sensor allows a wide dynamic range from 0–10 μS/cm up to 0–850 mS/cm with the same sensor.

The conductivity sensor is used for a conductivity range of 0-850 mS/cm (DIN EN 27888/ISO 7888 and ASTM D1125) and user-defined concentration measurement.

Applications include conductivity control for chromatography processes for pre/post column monitoring of pure, drinking and treatment water; in TFF/ultrafiltration; heat exchanger control; and for interface detection in food and beverage and CIP processes.

Online: www.ams-ic.com.au
Phone: 03 9017 8225
Related Products

Protect-Air HoseGuard Air Safety Fuses

Protect-Air's HoseGuard is designed to enhance workplace safety by automatically responding...

igus D1 motor control with certified PROFINET

The igus D1 motor control can now be integrated into higher-level control systems from Siemens,...

Raptor Combination metal detector and checkweighing system

Supported locally in New Zealand, Fortress Technology is introducing its waste-reducing,...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd