Huber Instrumente Digital pressure calibrator Type TM40
The Huber Instrumente Pressure-Calibrator TM40 is built completely modular, with four slide-in slots that are freely configurable. This allows the calibrator to be equipped to suit the end user’s individual requirements.
There are two different types of modules available, including Measuring Module (MM40) and Generator Module (GM40).
The Measurement Module needs one slot in the TM40, so it’s possible to cover four different measurement ranges with the TM40. Features include: accuracy classes up to 0.05% F.S. selectable; symmetrical measuring ranges available; and -1 up to 250 bar.
The Generator Module needs two slots in the TM40, so it’s possible to operate two GM40s in the device, or one GM40 and two MM40s. Features include: measure pressure; generate pressure and automatically regulate it; control accuracy of pressure generation is 0.1 Pa; accuracy classes up to 0.05% F.S. selectable; symmetrical measuring ranges available; automatic pressure regulation up to -/+ 10000 Pa; and built-in step generator.
The GM40 is able to build up and regulate the pressure of a given set-point autonomously. Other features include: maximum of 20 measurements per second; graphical display of the pressure measurements in real time; touchscreen; USB com-port; SD card; temperature-compensated sensors; long-term stability; and Li-ion rechargeable battery.
Phone: 03 9017 8225
Rockwell Automation PointMax I/O
Rockwell Automation has released PointMax I/O, a flexible remote input/output (I/O) system...
NORD Drivesystems NXD tupH surface treatment
The NXD tupH surface treatment has been developed by NORD to make aluminium as resistant as...
igus D1 motor control with certified PROFINET
The igus D1 motor control can now be integrated into higher-level control systems from Siemens,...