Endress+Hauser Liquitrend QMW43 smart sensor

Saturday, 01 August, 2020 | Supplied by: Endress+Hauser Australia Pty Ltd


..jpg

The Liquitrend QMW43 is the latest innovation designed to optimise the clean-in-place process by reducing time and resources consumption at each cycle.

Where manual inspections and longer cleaning cycles were usually adopted as safety margins at critical installation points, the Liquitrend QMW43 smart sensor is able to measure build-up and conductivity of pipes and tanks where cleaning is difficult. The flush installation stainless steel (316L) replicates the same condition as the inner side of pipes and tanks, giving a valid build-up reading before and after the cleaning cycle.

Combining capacitance and conductivity measurement, the sensor is able to identify not only chemicals but also different products inside pipes without the need for visual inspections or lab analysis to prevent incorrect mixing and reduce contamination risks.

With both analog outputs and IO-Link communication capabilities, full documentation and traceability can be easily achieved to ensure compliance and safety standards are met.

For more information, visit: https://www.au.endress.com/en/field-instruments-overview/level-measurement/Conductive-level-Liquitrend-QMW43.

Online: www.au.endress.com
Phone: 1300 363 707
Related Products

Zetapack fruit sorting and grading machine

The Zetapack sorting and grading machine is suitable for ripe and delicate soft fruit.

EXAIR EasySwitch Wet-Dry Vac system

EXAIR's EasySwitch Wet-Dry Vac system simplifies the filter change process when switching...

Balluff pressure sensors with display

Balluff's latest range of pressure sensors provides a programming function, a visual display...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd